Step for install Coredy Wi-Fi Extender On Your Home Network?

1
Step for install Coredy Wi-Fi Extender On Your
Home Network?

• For Help You Can Call Us At Toll Free Number
  1(877) -649-6892
• For More Info Visit Our Website -
  https//www.mywifiextnet.xyz

2
Have you bought Coredy Wi-Fi range extender? If
yes, then you must be looking to install it with
your home network to extend the range of your
Wi-Fi signal. If you havent received help from
the Coredy service provider, then dont worry, we
will guide you through the process of how to
install this Wi-Fi range extender.
3
(No Transcript)
4
Quick Installation Guide
The following setup is for the repeater mode, so
if you are looking to set up the device as a
repeater mode, then the below-mentioned steps
will help you do that.
5

• Prerequisites
• The router needs to be working normally.
• Switch the side button of the repeater into ON
  and Repeater.
• Make sure that there is an electrical outlet
  available close to the router.

6
(No Transcript)
7

• Setup Process
• If you are trying to set up using the internet
  browser, then you will have to follow
  below-mentioned steps
• Plug the extender into an electrical socket, but
  make sure that it is near to the primary router
  or wireless access point.

8
(No Transcript)
9
2.Make use of your smartphone to connect to the
extender. You will be asked to enter a password
while trying to make the connection, so you can
find the PIN number at the rear panel of the
device 3.Now, visit ap.setup on your web
browser, or just type 192.168.10.1 in the address
bar of your web browser.
10
4.You will have to log into the Admin page by
entering details in username and password boxes.
Enter admin in the username and admin in the
password box. Click repeater wizard in the next
window. 5.Select your Routers network or APs
network in the next window followed by selecting
it.
11
6.Now, type in the Routers/APs Wi-Fi password
in the Security key/Wi-Fi key/password column and
then, click on apply. 7.You are going to see
the reboot process along with a Bar in the
following window. When that bar reaches 100
percent, then you will have to leave the device
as it is for a minute to let it reboot.
12
8.Now, open the list of all available networks
with the help of your smartphone. You need to
find Coredy. 9.Once youve found Coredy,
then you need to connect with it using the
password that you have set for your primary
router/AP.
13
10.If you find the internet to be in a working
state, then you will have to unplug your Coredy
Wi-Fi extender and plug it halfway between your
router and the device on which you wish to use
the internet. The internet signal will start
coming in the dead zones of your house where
there used to no signal in the past.
14
WPS- Method You can also make
use of the WPS function as an alternative set-up
method, but you need to have a WPS button on your
main router. Press and hold the WPS button of the
main router until the WPS LED begins to blink.
15
(No Transcript)
16
Now, press and hold the WPS button for three
seconds on the rear panel. Once you see the WPS
light blinking on the rear panel as well, then
wait for a minute so that the main router and
Coredy Wireless range extender can pair, and then
connect to Coredy SSID on your smartphone using
the main routers password.
17
SOURCE
www.mywifiext.net www mywifiext
net mywifiext wifi extender wifi range extender
18
(No Transcript)