Lesson 15: Voyage Planning and Time - PowerPoint PPT Presentation

About This Presentation
Title:

Lesson 15: Voyage Planning and Time

Description:

The average speed in knots which must be maintained during a passage to arrive ... Transfer rhumb lines to a mercator projection ... – PowerPoint PPT presentation

Number of Views:2813
Avg rating:3.0/5.0
Slides: 25
Provided by: USN6
Category:

less

Transcript and Presenter's Notes

Title: Lesson 15: Voyage Planning and Time


1
Lesson 15 Voyage Planning and Time
2
Lesson 15 Voyage Planning and Time
  • AGENDA
  • ETA/ETD
  • Determining Zone Time
  • Date-time Group (DTG) Format
  • The Voyage Planning Process
  • Optimum Track Ship Routing (OTSR)
  • Applicable reading Hobbs pg. 252-274.

3
Terms and Definitions
  • Estimated Time of Arrival (ETA) the time and
    date of arrival that must be achieved. Usually
    specified by higher authority.
  • Estimated Time of Departure (ETD) a computed
    estimate of the time and date of departure that
    will allow the ship to arrive on time.

4
Terms and Definitions
  • Speed of Advance (SOA) The speed intended to
    be made good along the track.
  • The average speed in knots which must be
    maintained during a passage to arrive at a
    destination at an appointed time.

5
Terms and Definitions
PIM-
  • Planned track movement based on required SOA
  • USS Indianapolis
  • Indicated every 4 hours
  • Needed for ALL Voyage Plans
  • PIM symbol must be different from standard
    navigation symbols. Ex

1200Z PIM
6
The Mean Sun Zone Time
  • The mean sun completes one circuit around the
    earth every 24 hours, or 15 degrees of longitude
    each hour.
  • Each 15 degrees of arc is a time zone.
  • Within each zone, time is reckoned according to
    the position of the mean sun in relation to the
    central meridian of the zone.

7
Greenwich Mean Time (GMT)
  • Centered on prime meridian.
  • Extends 7.5o east and west of the prime meridian.
  • Referred to as zulu time, because the time zone
    is designated by Z.
  • Each additional time zone (as we move east or
    west) has a boundary every 15 degrees past 7.5o.

8
The International Date Line
  • The 24th time zone is split in half, with each
    zone on either side of the 180th meridian being
    only 7.5o wide.

9
(No Transcript)
10
Determining the Time Zone
  • To determine the time zone, simply divide the
    longitude of a location by 15.
  • If the remainder is lt 7 1/2, quotient is the
    zone
  • If the remainder is gt 7 1/2, shift to the next
    zone
  • For eastern longitudes, place a negative sign (-)
    in front of the number for western longitudes,
    place a positive sign () in front of the number.

11
Time Zone Example
  • The longitude of Norfolk, Virginia is 076o 18.0
    W. What time zone is this?
  • Answer
  • 076 18.0/15 5 w/remainder of 118
  • 118 lt 730 ? Zone description 5
  • Since longitude is west, time zone is 5.
  • The time zone indicator letter for this zone is
    R, so the zone is completely described as 5R

12
Daylight Savings Time
  • As an example, when Norfolk observes daylight
    savings time, it keeps 4Q instead of 5R time.
  • The time kept at any particular location and time
    of the year can be determined from either Coast
    Pilots or Sailing Directions.

13
Time Conversions
  • During voyage planning, all times are normally
    expressed in Zulu (GMT) to avoid confusion.
  • As necessary, times are converted to the local
    time zone for ease of use.
  • The formula for all conversions is
  • Zone time zone description GMT

14
Time Conversion Example
  • Its 0800 (local zone time) in Naples, Italy.
    What is this time, expressed as GMT?
  • Answer
  • Longitude of Naples is 014o 16 E, so the time
    zone is -1A.
  • GMT ZT ZD 0800 - 1 hour 0700 Z

15
Date Time Group (DTG)
  • Official Navy format for expressing time and
    date. Also in all naval message traffic.
  • An example 171000RJUN89 translates to
  • 17 1000 R JUN 89
  • DAY 4-DIGIT TIME 3 LETTER LAST TWO
  • OF TIME ZONE MONTH DIGITS OF YEAR
  • MONTH INDICATOR

16
Shipboard Time
  • During a transit, the ships clocks are set to
    the time zone in which the ship is located.
  • As the ship transits eastward, clocks are
    periodically advanced 1 hour to conform to the
    proper time zone, and vice versa for westward
    travel.

17
Rhumbline Track on Mercator Chart
  • Rhumbline Sailing
  • Appears As a More Direct Route on Mercator
    Projection
  • Maintains Constant True Direction and the Same
    Angle at All Longitude Meridians
  • For Short Distance Tracks
  • Rhumbline Is Same As GC Track

18
Track Development
  • Steps
  • Select Great Circle and Mercator Charts
  • Depart and Destination Positions Plotted
  • Start at First 5 Long Meridian Retrieve
    Latitude and Longitude every 5 Meridian
    thereafter ?
  • Transfer Track Positions to Mercator Projection
  • Record Positions on PIM Sheet ?

?
19
The Voyage Planning Process
  • Obtain and update charts and pubs
  • Determine time of arrival and departure.
  • Plot the intended track
  • Plot a great circle on a gnomonic projection
  • Transfer rhumb lines to a mercator projection
  • Construct a track summary listing courses,
    distances, and times for each leg.

20
(No Transcript)
21
(No Transcript)
22
(No Transcript)
23
Optimum Track Ship Routing (OTSR)
  • OTSR Provides
  • Preliminary planning
  • Route Recommendations
  • Route Surveillance
  • Divert Recommendations

24
REVIEW
  • What is SOA?
  • What is OTSR?
  • ZULU time is also known as _______?
  • What time zone is Voyage Planning completed in?
Write a Comment
User Comments (0)
About PowerShow.com