ClearSight Gigabit

1
ClearSight Gigabit
2
Features

• 100 full rate capture can be performed in
  high-speed mode
• In stream mode, all ClearSight analyzer functions
  such as real time application flow analysis
  (ladder view) are available
• Supports Gigabit auto-negotiation decoding
  Gigabit Auto-negotiation

3
Features

• The new PCI-X Gigabit card supports 10/100M full
  duplex and Gigabit Ethernet. The card includes
  two RJ45 ports for 10/100/1000Base-T and two SFP
  ports for the fiber interface
• The RJ45 ports and SFP ports cannot be used at
  the same time
• 100 full-rate capture is supported for a 10/100M
  full duplex Ethernet link

4
Features (Cont.)

• The 128MB shared streaming buffer allows
  high-performance real-time
• Supports capture of jumbo frames up to 10Kbytes
  from Gigabit Ethernet
• Supports both an end-station connection and a
  pass-through mode connection using a tap

5
Functional Loopback Test
6
Functional Loopback Test (Cont.)

• A suitable LC to LC cable are needed
• If the SFPs are linked together with a suitable
  loopback cable, the Link Status should be Green
• This will verify that both Channels on the card
  are functional, meaning good SFP's and
  Transceivers and would point to external issues
  with the switch or connectors etc

7
Interface Operating Setting
8
Tap10/100M FDX Supported Model

• 10/100M Full Duplex Tap

9
Tap10/100M/Gigabit Supported Model

• 10/100/1000 Copper Tap
• Option Giga SX SFP modules and Multi-mode
  Splitter Tap

10
Gigabit connection Mode 1
Pass through mode ( no TAP )
Span Port
Span Port
11
Gigabit connection Mode 2
Pass through mode ( using TAP )
12
Gigabit connection Mode 3
End station mode
Ch A
13
Gigabit connection Mode 4
Multi Segment mode
A
Span Port
Seg A
Seg B
Span Port
B
14
Mode Wire speed Streaming

• 100 full rate capture available in Wire-speed
  mode
• In low traffic situation, streaming mode is
  recommended for real time analysis

15
Updating Drivers

• Open gigabit Adapter Properties window (Start gt
  Control Panel gt System gt Hardware tab gt Device
  Manager gt Double Click on the ClearSight Networks
  Gigabit Adapter SC1)
• Shutdown ClearSight Analyzer first
• Then update the driver, use http//www.clearsightn
  et.com/files/software/cs-gbd.zip
• It could available after reboot computer

16
Demo