A better environmental alternative and upgrade to replace gypsum drywall and cement backer boards for walls, floors and countertops.

1

• A better environmental alternative and upgrade to
  replace gypsum drywall and cement backer boards
  for walls, floors and countertops.

2
Why is GREENE-BOARD
GREEN
GREENE-BOARD is manufactured with patent pending
proprietary process of natural mineral products
including magnesium oxide and magnesium chloride.
The manufacturing process for GREENE-BOARD
consumes less than 50 of the energy required to
make a Portland cement based product. When
GREENE-BOARD is sized, excess material is saved
and recycled into the future production runs.
100 of the post-industrial waste created during
manufacture is recycled. GREENE-BOARD also
contains a minimum of 5 post-consumer waste
material. GREENE-BOARD has a natural resistance
to the growth of mold and mildew, without the
addition of toxic chemicals. GREENE-BOARD also
contains no silica, no asbestos, no VOCs, so it
is safe to install and safe for the end-user.
Because of these features GREENE-BOARD
contributes to USGBC LEED point for indoor air
quality. GREENE-BOARD also contributes t0 USGBC
LEED points for durability (lifespan) and
recyclability. Because the primary components of
GREENE-BOARD are all natural, it can be recycled
as construction fill with no negative impact on
the environment. GREENE-BOARD can also be
recycled through a re-manufacturing process.
3
LEED LEADERSHIP IN ENERGY AND ENVIRONMENTAL
DESIGN
A rating system developed by the US Green
Building Council (USGBC) to assess the
environmental sustainability of building designs.
LEED is the nationally accepted benchmark for the
design, construction and operation of high
performance green buildings. LEED promotes a
whole-building approach to sustainability by
recognizing performance in five key areas of
human and environmental health sustainable site
development, water savings, energy efficiency,
materials selection and indoor environmental
quality.
LEED certification is third-party validation of a
buildings performance. LEED certified Projects
blend environmental, economic, and
occupant-oriented performance. They Cost less to
operate and maintain are energy-and
water-efficient have higher lease-up rates Than
conventional building in their markets are
healthier and safer for occupants and are
a Physical demonstration of the values of the
organizations that own and occupy them.
Contributes 4 points to the LEED program. EQ
Indoor Air Quality EQ 3.2 No VOCs MR 4.1 10
of Board is recycled back into production. MR 8
Lifetime Durability
4
ENVIRONMENTALLY FRIENDLY
More than 50 lower energy usage during
production in comparison to cement based
products (HARDI BACKER)
No hazardous chemicals or VOCs (volatile organic
compounds)
No Silicates (HARDI BACKER)
Low Environmental Impact LEED points for
durability and indoor environmental quality
Post Industrial Waste is fully recycled during
production
100 recyclable. No extra costing for special
disposal (HARDI BACKER)
5
EASY TO INSTALL
Score and Snap Simple utility knife can be used
Easy Fastening Conventional fasteners can be
used (screws/nails/staples)
Will not crumble like cement and gypsum products
Tile Backer Board - Excellent adhesion with
setting materials when being used as a tile
backer. Install with smooth side down
Wallboards Easy to finish when being used as a
wall board. Install with smooth side out
6
MOLD AND MILDEW RESISTANT
Natural mold and mildew inhibitors Because of
its natural high ph levels mold/mildew cannot
grow
Fungus resistant properties under ASTM D-3273 and
found no evidence of fungal growth. All samples
had a rating of 10 (perfect score)
Similar product manufacturers add chemicals to
deter mold and mildew. (HARDI-BACKER, FIBEROCK
AQUA TOUGH)
WATER RESISTANT
Impervious to Water Liquid water or water vapor
will not harm our product
Will not rot, warp, delaminate or disintegrate
when exposed to water
Can be stored outside Eliminating expensive
storage fees
7
FREEZE THAW TOLERANCE
Resistant to freeze thaw and sulphate
Can withstand wet / dry applications without
breaking down
IMPACT RESISTANT
Excellent Resistance to damage from impact
TERMITE VERMIN RESISTANT
Highly resistant to termite and vermin attacks
THERMAL VALUE
Low thermal conductivity
Transfers heat or cold slowly over time aiding in
cutting back on the heat or cold loss through the
wall
8
SOUND INSULATION
Achieved rating for ASTM E90. (14 better sound
rating than 5/8 drywall
FIRE PROOF
NON COMBUSTIBLE No Flame Spread
Has a minimum 2 hour Fire Rating (1/2) to BS 476
Part 22
Designed for all fire wall applications
Melting point at 2827 /- 30 degrees Celsius
Incorporates a main ingredient that is used as
the primary material to line furnaces or
refractory's in the steel industry
ASTM E-119 ASTM E-84
20 YEAR LIMITED WARRANTY
Our GREEN E-BOARD is warranted to be free from
defects in material It will not swell, soften,
decay or disintegrate in service and will not
delaminate as a result of exposure to moisture
for the life of the product
WE WILL MATCH ANY INDUSTRY WARRANTY FOR THE
PRODUCTS WE SELL!
9

• VS

10

• VS

11
VS
12
VS
13
VS
14

• OTHER USES

• Paint or Stucco Substrate
• Interior or Exterior Plaster Hard walls
• Basement Floor Component
• Exterior Wall Cladding
• Elevator Shafts
• Fire Walls
• Can be tongue and grooved or bull nosed
• Suspended Ceiling Tiles
• Foundation Wall Protection/Insulation
• Ideal for outdoor Signage
• Door Skins
• Roofing Base Sheet