How to Install AMPsentrix Core Battery on iPhones?

1
How to Install AMPsentrix Core Battery on iPhones?
2

• iPhone batteries are rated to hold 80 of their
  capacity for up to 500 charge cycles, which lasts
  roughly 18-24 months for most users. After that,
  your iPhone may need to be charged far more
  frequently, and iOS may warn you that performance
  is affected (in other words, your phone will run
  slower).
• Ampsentrix core is a new lineup of Ampsentrix
  batteries that come without flex cables and
  boards. The product includes just the core of the
  battery hence the name Ampsentrix Core.

3

• AMPsentrix Core allows you to replace iPhone
  batteries while keeping the important battery
  info intact!
• AMPSentrix Core allows you to replace batteries
  for iPhones and above without limiting your
  customer's battery health data. Compared with
  other battery this AmpSentrix Core battery charge
  faster, last longer and have a higher power
  density for more battery life in a lighter
  package. Our AmpSentrix Core batteries not only
  pass industry standards but we are also certified
  by official standards. All AmpSentrix Core
  Batteries come with Zero Cycle count, OEM TI
  Gas Gauge Chip, and Pre-installed Battery
  Adhesive.
• Now a day, there are many DIY replacement Steps
  have been check to replace iPhone Batteries.

4

• Are you new to the Cell phone repair industry?
  and you are looking for iPhone Battery
  Replacement Steps and video? here we will guide
  you How to replace iPhone Batteries. Just follow
  the below steps.

1. Remove Sim Tray and Remove two 6.75 mm long
   Pentalobe P2 screws at the bottom edge of the
   iPhone.
2. Heat the lower edge of the iPhone using hairdryer
   or heat gun.
3. Using iSclack tool, you can separate LCD Display
   from body.
4. Remove Original Flex from the Original Battery.
5. Spot weld original Flex to new AMPsentrix core.
6. Fold the Flex and Install the Supplied flex
   Cover.
7. Apply Flex Cover Sticker.
8. Plug in the tag-on flex to the battery connector.
9. Plug in the tag-on flex to the battery health
   corrector.
10. Plug in the Battery health corrector to a PC and
    run Qianli Repair Helper Software.
11. Reset the Battery health Percentage and cycle
    counts.
12. Unplug the battery from the battery health
    corrector and install it in the Device.

5
Here are Some important Tools during
installation.

• Macaron Portable Spot-Welding Machine
• Battery Spot Welding Fixture
• Qianli TAG-ON flex
• Copy Power Battery Health Data Corrector

6
Why Do I need a Tag-on Flex?

• The Tag-on Flex is needed for the iPhone 11
  series and 12 Series and not for the XR, XS and
  XS Max. It is used when resetting the battery
  data and stays on the battery when installing the
  battery back in the Device.

Watch Complete Installation video
https//www.youtube.com/watch?v4NgpjgR-vvw Mobi
leSentrix is leading supplier for Cell Phone
Batteries, iPhone Batteries, Samsung Mobile Phone
Batteries. All Batteries are working fine and a
perfect fit on the specific devices.
7
Thank You
www.mobilesentrix.com
_at_mobilesentrix
_at_mobile_sentrix