How Service Centers In India Clean And Degrease Engine Cylinder Liners?

1
Engine Cylinder Liners Services

• By Jai Liners Leading Manufacturers of Cylinder
  Liners

2
How Service Centers In India Clean And Degrease
Engine Cylinder Liners?

• Know about Engine Cylinder Liners
• Steps to clean Engine Cylinder Liners
• Pressure Wash
• Soak in for Safe Cleaning
• Scrub
• Rinse and Repeat to get Clean Parts
• Conclusion
• Contact

3
Know About Engine Cylinder Liners

• Manufacturers and service providers of engine
  cylinder liners conduct various processes to
  clean and degrease engine liners and spares. The
  initial steps involve cleaning and degreasing of
  the parts. Even if the part is newly brought by
  you, it must be cleaned before use. Aluminium is
  a delicate metal to certain cleaners and if you
  use wrong cleaning agent, it may corrode and
  damage the top layer. However, the damage would
  be at microscopic level, still it affects the
  durability of the part.

4
Steps to clean Engine Cylinder Liners

• Lets learn how Indian service centers clean
  Engine Cylinder Liners step by step.
• Pressure Wash
• Soak in for Safe Cleaning
• Scrub
• Rinse and Repeat to get Clean Parts

5
Steps to clean Engine Cylinder Liners

• 1. Pressure Wash
• This is the first step towards cleaning of
  aluminum parts. With pressure washer, you can
  remove excessive loose debris, such as grease
  chunks and dirt. It all depends on the size of
  the part- if you want to clean bigger parts, such
  as car frames, you should use higher powered gas
  pressure washer. But if you are having smaller
  parts to clean, you can use electric pressure
  washer for good results.
• If the part does not have delicate areas or
  bends, you can set the washer pressure at
  pencil setting. With this setting, you can
  focus all the pressure at a point and remove dirt
  in few seconds. You need to be careful as the
  pressure can cut your skin if you mishandle the
  washer.

6
Steps to clean Engine Cylinder Liners

• 2. Soak In For Safe Cleaning
• Once the washer removes loose debris from the
  part, you can spray it with aluminium safe
  cleaner. Normal household products may degrade
  the part, so make sure you use specialized safe
  cleaners that are intended for cleaning delicate
  metals and alloys.

7
Steps to clean Engine Cylinder Liners
Fig- Showing before and after effect of using
safe aluminium cleaner
8
Steps to clean Engine Cylinder Liners

• 3. Scrub
• After soaking the part for about 5 minutes, you
  can spray a little more and scrub it down using
  nylon brush. Scrubbing will give you dirt free,
  shining aluminium part.
• 4. Rinse And Repeat To Get Cleaner Part
• Once you are done with scrubbing, you can rinse
  it off with the pressure water. Repeat the
  scrubbing and rinse again with pressure washer.
  Once it is done, you can rinse the part with hot
  water and blow-dry it.

9
Conclusion

• This is how most service centers clean Made in
  India engine cylinder liners. You can also take
  advantage of these shared tips and clean and
  degrease your aluminium spares. Thanks for your
  time, do feedback!

10
Contact Us
11
Thank You