Metal Cutting Saw Blade – A cost effective tool for cutting.

1
(No Transcript)
2
Introduction

• Saw is a hand tool having a toothed blade.
• It is used to cut hard materials like wood.
• They are the most primitive tools available to
  mankind.
• Production of saw has seen changes
  innovations.
• The look and utility of saw has been diversified
  in the modern era.
• More advanced high quality saws are being
  produced in large
• numbers.

3
Evolution

• Cheap weak copper bronze were used for
  making saw during Iron
• Age.
• The efficiency of saw mainly depended on the
  teeth.
• The number of teeth has a direct impact on the
  performance of the
• Saw.
• Saw kept on improving its functionality and look
  with more
• Advancements.
• Today a large number of saws are available to
  cater the industrial
• needs.

4
Raw Materials Used

• The main material used is tempered, high grade
  steel which is alloyed
• with certain metals.
• Saws are mostly made with handles made of molded
  plastics.
• Different saws differ in the number of teeth it
  has depending on the
• kind of work which is going to be taken from it.
• The angle at which they are kept also differ
  from one saw to another.
• The material used to manufacture saws also keep
  on changing.

5
Manufacturing Process

• A specific steel alloyed with tungsten is
  produced and later rolled into
• Strips.
• The strips is then cooled down so that it can be
  transformed into
• Blades.
• Adjustment of the teeth is very important for
  the saw's effectiveness.
• Hardening is what comes next which includes
  hammering of the blade
• to make it stiff and flexible.
• After spraying a coating of rust protection the
  final blades are fastened
• to previously made handles.

6
Quality Control

• The production process of the saws has to be
  done with highly secured
• measures.
• American National Standard is one such body
  which looks into these
• matters to diminish the chances of any hazard.
• There is a set standard of mixture and amount of
  raw materials which
• should be taken to produce saw.
• A standard steel blade for private use cannot be
  more than 1.25 alloy
• while an industrial saw should be able to
  withstand a temperature up to
• 1000 F.

7
Our Products
8
Why choose us?

• Experience of more than 3 decades in hacksaw
  blade manufacturing
• Industry.
• BIPICO has established into a crucial cutting
  tools manufacturer and
• exporter with a potent brand image in India and
  in International
• Markets.
• We at BIPICO provide the customers with unique
  products such as
• Hacksaw Blades, Abrasive Cutting Tools, TCT Saw
  Blades, Diamond
• Saw Blades.

9
Contact Us
Address Nadarkha, Post Box No. 36, Chikhli Road,
Bilimora 396 321 Dist. Navsari, Gujarat, (
INDIA )
Contact 91- 2634- 284629 / 284630 / 283695
91- 2634- 283256
Email info_at_bipicoexp.com(For General
Information)