Some Cleaning And Maintenance Tips For Decking Board Sydney

1
Some Cleaning And Maintenance Tips For Decking
Board Sydney

• Decks Made Up Of Boards Can Help Your Home Get A
  Distinguished Look And Appearance. But This
  Happens Until They Are New. As Soon As They Start
  Losing Their Newness, They Slow Down Their
  Working And Start Requiring Preservation.

2
Steps To Infuse In Maintenance

• Washing
• Removal of Dirt and Debris, Wood Fiber, Etc. from
  the Deck s Very Important.
• It can be done easily using a pressure washer.
• While doing so, make sure that you keep the
  pressure stream moving.
• Not doing this might result into wood gouging.
• Once cleaned thoroughly, let it dry overnight on
  its own.

3
Fixing Nail Pops

• Remove every nail that has worked loose from the
  board.
• You can use a cat paws hammer for the same.
• You should use a screw that is longer than the
  nail and reattach the board with it.

4
Split Wood Repairing of Decking Board Sydney

• Mark the parts of the decking boards that have
  splits or any other damages.
• While marking, ensure that you dont mark those
  that are directly over a joist.
• This could result into your saw getting damaged
  as you begin the cutting process.
• Cut the board with a jigsaw.
• Remove the nails or deck screws.
• Remove the damaged wood.
• Use deck screws to attach a pressure-treated 2/4
  inch.
• Cut a replacement board to size, pre-drill and
  fasten it with deck screws.

5
Contact - ABBEY TIMBER

• Address - 41 Heathcote Rd, Moorebank NSW 2170
• Telephone FAX [phone]
• E-mail andrew_at_abbeytimber.com.au