How to replace a broken clothes dryer belts - PowerPoint PPT Presentation

About This Presentation
Title:

How to replace a broken clothes dryer belts

Description:

At the point when the sofa didn't turn out dry following 60 minutes, and we began to notice a consumed elastic notice, it was entirely clear that the dryer wasn't turning. More often than not, this is on the grounds that the belt is broken. Dryer Belts Bombinobelts - – PowerPoint PPT presentation

Number of Views:12
Slides: 10
Provided by: anjal079

less

Transcript and Presenter's Notes

Title: How to replace a broken clothes dryer belts


1
HOW TO REPLACE A BROKEN CLOTHES DRYER Belts
  • Bombinobelts A Dryer Belts manufacturer

2
Tools needed
  • Screwdriver
  • crescent wrench
  • hammer/pry bar (depends on the model)
  • replacement dryer belt
  • vacuum (optional)

3
  • Once in a while, when you cause to much weight on
    a dryer it could break the dryer belt.
  • Never fear, this is a simple fix.
  • On this specific dryer, there was a substantial
    wet sofa-bed put in the dryer.
  • It was quite recently too overwhelming of a heap,
    and it inevitably broke the belt.

4
  • At the point when the sofa didn't turn out dry
    following 60 minutes, and we began to notice a
    consumed elastic notice, it was entirely clear
    that the dryer wasn't turning.
  • More often than not, this is on the grounds that
    the belt is broken.

5
  • A "Widespread" dryer belt at Lowes for just 8
    bucks. Read the bundle, you can generally check
    whether it will fit your model of dryer.
  • we are dealing with a Whirlpool dryer, and this
    belt is "suited for most Whirlpool Dryers".

6
  • A dryer doesn't have much to it.
  • There's a major drum, the belt and an engine.
  • There was just a couple of fasteners and screws
    on this model to expel to get to within.
  • You may require a pry bar or the back of a mallet
    to pry open the cover, as I did.

7
  • Once you're within and you evacuate the drum, we
    profoundly prescribe vacuuming out any build
    up/clean develop.
  • You should do it now while you're inside the
    machine.
  • Take the old belt off the machine, this one was
    broken, so it was quite simple.
  • Wrap the new belt around the drum, and snare
    around the apparatus on the engine.
  • You can perceive how it's snared on my dryer. May
    beyond any doubt the belt isn't contorted.

8
  • Thus, from that point forward, invert the
    procedure, and set up everything back together.
  • On the off chance that all goes well, you're
    dryer will work flawlessly again and you'll have
    returned to doing clothing at home rather than
    your companion's home.

9
Bombinobelts A Leading Dryer Belts manufacturer
in India
  • Presentation by
Write a Comment
User Comments (0)
About PowerShow.com