Simple Way to Install Auto Lock Door in Car

1
Simple Way to Install Auto Lock Door In Car
2
If the old lock of your car door stops working
or the key has broken off in the lock, then it
better to install a new auto lock.
3
If you want to put a new auto lock in your car
door, then it not at all a difficult task you
will imagine earlier.
4
In most of the cases, you can also handle and
manage the job in an hour without using any
special tools.
5
In the worst cases, the auto lock on the
driver's door needs to be replaced when it will
wear out or damaged.
6
The below-given steps help you to install the
auto locks in your car door easily.
7
Accessing the interior
8
Start the installation process by using a
screwdriver to take out the screws hold in the
armrest by the door and take off the covers of
the speaker in the door.
9
Take off the interior door panel that held by a
series of plastic clips. Then push the
screwdriver between the panel and metal frame to
ease the panel out.
10
Then remove the interior door handle with a plier
and pull out the plastic clip. Twist it and allow
the dangle to free for accessing the assembly of
the lock.
11
Door handle assembly
12
Inside the door a lock core is placed that one
joins with a road which is also attached to the
door handle assembly.
13
For installation you can disconnect the rod from
the auto lock core in the door. Open up the clip
and take out the door handle assembly.
14
Then use the pliers to take off the pair of
bolts which also holds the door handle assembly
onto the rod.
15
Lock
16
If you want to take out the auto lock on the
car, first move out the clip from the snap ring
to release the lock.
17
After that put the new lock in the place of the
old one and ensure that the lock is placed
properly on the way up.
18
Then you have to put the clip back on the snap
sign to secure the lock and make sure that when
you insert the keys, that won't be twist up.
19
Reassembly
20
Then after put the door handle assembly into the
door again and marked the place in which you
reconnect the bolt on the rod and the rod to the
lock core.
21
After doing all this, test the key in the new
lock to ensure that you will easily and properly
open and close the door.
22
When everything working well reassembles the
door. Reverse the above steps for fitting the
clips, replace the armrest and speaker cover.
23
https//markdouglasmotorworks.com/
Thank You