Conveyor Belt Repair Material (1)

1
Conveyor Belt Repair Material
NIPL Engineering Pvt. Ltd
2
Conveyor belts break in the middle due to high
stress due to production runs. It can lead to
downtime and it cannot be taken as an option all
the time. New replacements can lead to downtime
and it is going to cost machine hours. Moreover,
additional downtime can be caused due to
installation process. Conveyor belt repairs is
the only way to cut reduce downtime and keep the
production on.
3
Conveyor belt repair
The Saddle method It involves eliminating the
damaged section by square it to equal distance in
either direction far away from the damaged areas.
As soon as the section is removed the new section
is spliced using a mechanical fastener or
vulcanizing for food grade conveyors or metal
detector applications. In this method the splice
is never in contact with the pulley. The saddles
are large enough to match the width of the belt.
4
Cold cure repair It is a method where the
damaged area is peeled off and cleaned for any
contamination. Then with the help of cold cure
splice kit the joints are made. The kit is made
up of filler material and cement. This method is
simple and can be completed even by untrained
workers. But it may take several hours before the
splice is cured and run in production.
5
All plastic belt Non piled food grade plastic
belt is cut and re-spliced. The homogenous nature
of the belt ensures there is less contamination
that leads to belt failure. Trained technicians
are skilled in all types of belt repairs. The
conveyor belt repair materials are made of high
quality ingredients for lasting effect.
6
Modular Belting This type of belt repair is done
in a snap. It is done by driving two rows of pins
using simple hand tools. Here a whole section of
modules are replaced within no time. As soon as
this simple repair is done, the conveyor belt is
ready to resume production activities.
7
Contact Us NIPL Engineering Pvt. Ltd Phone 91
44 4214-5016 Email info_at_nilosindia.com Website
http//www.beltpro.in/