Benefits and pitfalls of Modular UPS systems against Standalone UPS systems.

1
MODULAR UPS AGAINST STANDALONE UPS
2
Benefits and pitfalls of Modular UPS systems
against StandaloneUPS systems.

• The standalone UPS systems are made up of
  various components, which are spread out in a
  modular layout. Certain UPS manufacturers
  include a number of physical modules, as the
  scale volume in production is getting vast and
  huge.
• The UPS can also be set out for more efficient
  for heat dissipation, which not just saves the
  physical space but also increases the power
  density of the unit.
• In this post, we have mentioned the number of
  benefits Modular UPS holds against the Standalone
  UPS. Lets identify how UPS Systems
• industrial applications get the benefits from
  these UPS units. Just take a look

3

• Maintenance And Service
• During the service and maintenance period of a
  UPS, the connected loads are normally transferred
  to bypass, which works on the safe
  working requirements. During this time the
  connected UPS System for datacenter sans any
  power protection can be proven vulnerable to
  any mains electricity variations.
•  
• Less Loading Efficiency
• Through the UPS specification, it is hard for
  users to judge the total loading and UPS service
  life. The standalone UPS can be optimized
  to offer the high efficiencies at mid
  loadings, and the advanced modular UPS
  allow a specific number of modules to switch
  off, if the load decreases or is initially lower
  than expected, this lets the UPS to add extra
  pressure and also allows other power
  modules to run at a much efficient loading.

4

• Growth
• The frame size of the UPS consists of a bypass
  switch, main controllers and static switch
  depending on the manufacturer. While the frame
  size determines the total growth in power modules
  and can be added further if load increases.
• However, the correct mains supply protection
  should be handled with future additional battery
  requirements, so the modular UPS can be deployed
  efficiently.
• Cost
• The economical pricing of modular UPS against
  standalone units depends on the power
  infrastructure requirements, then when there is a
  requirement of 200kVA UPS, then a standalone
  unit would suffice the need, but when an element
  of redundancy is needed, then five x 50kVA power
  modules with modular UPS would turn more
  cost-efficient.

5

• Undeniably, the Modular UPS systems are
  dominating the niche market and this very
  popularity predicts that how modular UPS will
  overtake traditional standalone systems. However,
  to judge, which technology is most resilient,
  efficient and cost-effective to be used, can
  only be decided after considering the user and
  sites requirements.
• Henceforth, you must get in touch with the
  industry leaders to decide what suits best and
  accelerate the growth of your manufacturing unit
  or any other industry space.
• Reach experienced, helpful and honest UPS
  specialist Riello- an Uninterruptible Power
  Supply Manufacturer and get the best answer for
  your particular power protection
  requirements. They will assist you in
  determining which the correct choice is for
  you.

6

• Reach Us
• RIELLO POWER INDIA PVT Ltd. (Corporate Office
  Gurgaon)
• 318, 3rd Floor, Time Tower, MG Road
• 122002 Gurgaon (HR)
• Tel. [phone]
• Email ups_at_riello-power.com
• RIELLO POWER INDIA PVT Ltd. (Factory)
• Plot no. 213A, Sector-4, IMT Manesar
• 122050 Gurgaon (HR)
• Tel. [phone]