NS0-182 Braindumps

1
Want to Know How To Pass NetApp NS0-182 exam
2
You Need To Know Something About NetApp NS0-182
Exam?

• Job Opportunities ?
• How To Prepare The NS0-182 Exam?
• How To Pass NS0-182 Exam?
• Sample Questions

https//www.certs4you.com/netapp/NS0-182-dumps.htm
l
3
Will Help You To Prepare The Exam
Visit Us
https//www.certs4you.com/netapp/NS0-182-dumps.htm
l
4
How to Pass NS0-182 Exam Dumps
Click Here
https//www.certs4you.com/netapp/NS0-182-dumps.htm
l
5
Here Are NetApp NS0-182 Exam Questions
6
Question 1
Which two statements are true about the ONTAP 9.1
networking features. A. The broadcast domain is
a layer 2 object. B. The broadcast domain is a
layer 3 object. C. The MTU will be the same
across all ports in a broadcast domain. D. The
MTU will change based on each port configuration
ion broadcast domain Answer A D
https//www.certs4you.com/netapp/NS0-182-dumps.htm
l
7
Question 2
What is the main function of ACP? A. It allows
cabling the shelf to two additional
controllers. B. It allows thecontroller to use
Ethernet instead of SAS to fetch the storage
data. C. It allows the controller to
nondisruptively reset the SAS expanders. D. It
enables the automatic shelf ID assignment. Answer
B
https//www.certs4you.com/netapp/NS0-182-dumps.htm
l
8
Question 3
You are asked to installed a new cluster with six
FAS8060 nodes. While running Config Advisor, you
determine that there is a newer firmware version
for 16 HDDs. How should this situation be
handled? A. Prior to leaving the site, advise
the customer that firmware is included with the
version of ONTAP they selected. B. Unless the
customer advises otherwise, upgrade the firmware
on the HDDs to correct the Config Advisor
error. C. Unless the customer advises otherwise,
leave the firmware alone and document the version
of ONTAP being used to explain the issue. D.
Prior to leaving the site,confirm the version of
ONTAP that the customer wanted installed to
correct the Config Advisor error. Answer B
https//www.certs4you.com/netapp/NS0-182-dumps.htm
l
9
Question 4
A customer wants you to add a new AFF A700 HA
pair to an existing 4-node AFF8080 EX cluster.
The existing cluster uses netApp CN1610 switches
for the cluster connection and is using the
recommended port count. Which statements is true
in the scenario? A. You cannot mix different AFF
models in the same duster. B. There are not
enough portsavailable on the duster switch. C.
You cannot have more than four nodes with AFF. D.
The AFF A7O0 is not supported with NelApp CN1610
switches. Answer D
https//www.certs4you.com/netapp/NS0-182-dumps.htm
l
10
Question 5
A customer has recently purchase a new ONTAP 9.0
storage system and wants you to join the nodes
toan existing cluster running ONTAP 9.1. What is
the first step for adding the new controllers to
the existing cluster? A. You must ensure that
all network switches are upgraded and online. B.
You must configure the existing cluster to accept
the Joining nodes. C. You must make sure that
there Is the same amount of disk shelves attached
to all nodes. D. You must match the operating
system. Answer D
https//www.certs4you.com/netapp/NS0-182-dumps.htm
l
11
15 Off
By Use This Coupon Code issue15
https//www.certs4you.com/netapp/NS0-182-dumps.htm
l
12
Thank You For More Information Visit Us _at_
https//www.certs4you.com/netapp/NS0-182-dumps.htm
l