PABX System Installations in Dubai - PABX Installation Dubai

1
How to Install LG Ericsson PABX System
www.pabxinstallationdubai.ae
2
Requirements to connect LG Ericsson PABX System

• A third party TAPI (telephony programming
  application interface) license on PABX
• Firmware requirement iPECS E.0dy or later
• Firewall requirement iPECS UDP 5588
• Minimum version requirement of Go Connect Server
  2.4.0
• Require the IP address of the PABX system
• The PABX system should be connected to the same
  subnet as the Go Connect Server and to the same
  switch if possible.

3
How to connect LG Ericsson iPECS PABX System to
the network architecture

• The iPECS system can be connected to the LAN via
  a network socket on the main unit by setting the
  IP address and other network settings through
  programming on the HTML interface.

4
Steps to install LG Ericsson iPECS PABX System

• The Go Connect Server essentially is a powerful
  integrated software suite that integrates a lot
  of supported phone systems1.The first step is to
  add the IP address of the Go Connect Server on
  the PABX System including the System data, System
  Attributes (160, 161), and the IP address in CTI
  IP (52).2.No error message is thrown even if the
  above step does not help in connecting to the LG
  Ericsson PABX system.

5

• Continue..

• 3. You will have to manually check the IP address
  of the PABX system and Tapi license and retry. To
  validate the existence of TAPI license on PABX,
  press Trans/PGM and then enter 78 or 7 on iPECS.
  The appearance of the digit 2 on the second line
  of the display confirms the existence of TAPI
  license.
• Visit https//bit.ly/2HLlzTm

6
Contact Us
Techno Edge Systems LLC P.O.BOX-116216, Talib,
Moosa, MAHD Khalid Building, 312/32 Street
DM.18 SHOP 9, Bur Dubai,Dubai, U.A.E. Call us
971508740112/04-2513636 support_at_technoedge.ae
www.
pabxinstallationdubai.ae