Four Pilot Tests Used for Quality Control of Asphalt Pavement Work

1
Four Pilot Tests Used for Quality Control of
Asphalt Pavement Work
Next
2
What I discuss in this section

1. What is the asphalt finisher used for finishing
   with pavement?
2. The quality control method of asphalt
   construction
3. Pull flooring test to check the failure of the
   roadbed
4. Check the amount of asphalt without core
5. Check compaction degree of roadbed in field
   density test
6. Flatness test checks road flatness
7. My Company Introduction
8. Our Services
9. How We Can Be Found?

Next
Previous
3
What is the asphalt finisher used for finishing
with pavement?

• The asphalt finisher uses a heavy machine that
  performs the pallet construction of the base
  layer and the surface layer which is the final
  process of asphalt pavement work.
• As a structure, it is divided into a tractor
  section equipped with a self-propelled function,
  a hopper filled with heated asphalt mixture, and
  a screed which presses out the asphalt mixture on
  the paved surface and disposes of it.
• The asphalt mixture that has been carried in the
  dump truck is first stored in the hopper, and if
  it can fill the amount necessary for
  construction, it sends it to the screen with a
  roller and spreads the putty on the road so that
  it is filled with a spatula

4
The quality control method of asphalt construction

• Strict quality control standards are established
  for asphalt pavement which is supposed to be used
  for many years.
• Since the asphalt mixture is a paste, there are
  various factors that determine the quality, such
  as the temperature during mixing, the degree of
  mixing, and whether the pressure reduction is
  secure.
• At the same time, there is also difficult to
  judge simply by looking at the pavement from the
  outward appearance. Therefore, it is possible to
  do a test to check the quality during
  construction of the asphalt pavement and after
  construction, and to pass it through to finalize
  it..

5
Pull flooring test to check the failure of the
roadbed

• The pull flooring test is a test conducted before
  the asphalt mixture is laid, at the stage when
  the roadbed is exposed.
• Pass out a loaded dump truck etc. on the crushed
  stone of the compacted roadbed and check whether
  there is any problem on the roadbed surface after
  passing through the track.
• The examination is done by visual observation,
  and if you find a defective part on the roadbed
  surface, you need to take some remedial measures
  such as temporarily removing the material used in
  that part and replacing it with good quality
  material.

6
Check the amount of asphalt without core

• Core removal is a test that is performed after
  the completion of spreading asphalt mixture and
  after drying is completed. Determinate points
  randomly on the finished paved surface, drill
  holes in the place and pull out a part of the
  asphalt mixture spread over the surface layer and
  base layer.
• You can see from the sampled model whether the
  aggregate contained in the mixture meets the
  prescribed particle size, the asphalt at the
  bridge is how much the specified amount is used
  or how compacted by compaction. It is an
  important test to check the quality of the
  surface layer and the base layer which are
  exposed to the weathering and load most in the
  pavement.

7
Check compaction degree of roadbed in field
density test

• The density test is a quality test conducted
  after the roadbed finishes. Drill a hole in the
  compacted roadbed to recover a part of the
  roadbed material and fill the empty hole with
  sand. This is a construction method called sand
  substitution method, and we first reveal the
  volume according to how much sand entered.
• Consider the recovered roadbed material and
  divide it by the volume that was clarified ahead
  of time to derive the density of the roadbed
  material by calculation. If the roadbed is
  tightly compacted, it should satisfy the
  prescribed density, so it is the dimension that
  you can check the compaction condition of the
  road by measuring the density.
• The degree of compaction is directly linked to
  the load carrying capacity of the roadbed, and if
  the compaction is insufficient, there is a danger
  that the paved surface can withstand the weight
  of the car traveling above it.

8
Flatness test checks road flatness

• The flatness test is a test carried out after the
  finish of the surface asphalt mixture is
  completed. Use a flatness measuring instrument
  such as a wheelbarrow called 3 ? profile meter
  and check whether the pavement surface is
  flattened neatly.
• If the pavement surface is not flat, rainwater
  may accumulate in unintended places and become a
  puddle, or it may become a problem to the person
  passing over.

9
Standard Paving Inc.From roadway to driveway
WHO ARE WE
Next
Previous
10
Our Introduction

• Standard Paving Inc. is one of the most famous
  pavers in Virginia. We have been providing our
  services for last 3 decades. We are experts in
  expedited repair as well as renewal of your of
  current parking lots. We have done many projects
  based on replacing parking lots and to repair
  damaged roads. We have also made a number of
  private roadways and commercial roads.

Next
Previous
11
Our Services

• Commercial Roads
• Parking Lots
• Parking Lots Repair
• Private Roadway
• Striping

Next
Previous
12
Why Choose us ?

• Professional
• Free Estimate
• Employment
• Asphalt Paving
• Tar and Chip

Previous
Next
13
Website www.standardpavinginc.comPhone Number
844 266 7283physical address 8803
Sudley Road, Suite 206 Manassas, VA , USA

• How we can be found?

Previous