Hi-Tech Engineering Services - Fasteners Suppliers in Dubai

1
HI-TECH ENGINEERING SERVICES L.L.C
Fasteners Suppliers in Dubai
http//hitechuae.com/
2
FASTENERS

• Fastener is a big hardware component that is used
  almost everywhere, whether it's your door hinge
  or any house hold gadget, whether it's
  automotive, machinery, building, infrastructure
  or any other object that needs assembly will
  surely have fasteners to attach it. What if a
  single fastener breaks down or becomes loose?
• It would definitely affect or trigger detrimental
  effects for the whole system.

http//hitechuae.com/
3
ADVANTAGES OF FASTENERS

• Mechanical fasteners in one form or another have
  existed almost from the cave man days with
  advances in more recent years allowing them to be
  used effectively in most forms of assembly
  environments while meeting protection, quality
  and cost requirements at the same time.
• They continue to be a easy solution to assembly
  problems offering a low-risk, optimistic
  communication system that can be disassembled
  easily. They have no thickness restriction, are
  not environmentally sensitive and provide
  confirmation of via thickness, have low
  sensitivity to peel stress and have no
  significant residual stress problems.

http//hitechuae.com/
4
TYPES OF FASTENERS

• Bolts and Nuts
• A bolt is a fastener with thread which is often
  coupled with a nut. Bolts have male thread
  outside, and nuts have male thread within.
• A bolt consists of a head, a cylindrical body,
  and length threads. Bolts normally have a flat
  head which means the head has no grove. It
  normally has the configuration to get powered by
  the wrench tool on its periphery and the same
  goes for the nut.
• Screws 
• These are the fasteners which, when fastening
  into the material, create their own thread. They
  usually have a head and a helical threaded shank.
  
• 
  
  
  http//hitechuae.com/

5

• Washers 
• These are the thin plate, disc form with a hole
  in the centre and the outer diameter is usually
  twice the inner diameter that is used to spread
  the load on which it is fastened, such as on the
  screw or nut. This can also be used in many
  applications as a spacer, locking unit, wear pad
  etc.
• Inserts
• These are the usually strong cylindrical threads
  in form often known as thread bushing and are
  used for various purposes such as maintaining a
  long-lasting link between the different materials
  or restoring stripped threads. Usually these are
  used to disperse loads from small screw diameter
  to larger inserts diameter.

http//hitechuae.com/
6

• Anchors Fasteners
• These are commonly used in building and masonry
  or stone industries, and are used for linking
  structural and non-structural material to
  concrete or other materials. These are usually of
  two types mechanical anchor fasteners and
  fasteners to chemical anchors.
• Rivets
• A rivet between two parts establishes a permanent
  bond. They are a cylindrical shaft with a head at
  one end and a tail at the other. Compared to
  other forms of fasteners Rivets are extremely
  durable.
• Snap Rings
• They 're usually found in parts of car engines,
  absorber shocks.
• 
  
  
  
  
  http//hitechuae.com/

7
DIFFERENT USES OF FASTENERS

• Vehicle assembly
• Picture hanging
• Building and construction
• Furniture assembly
• Cabinet installation
• Electronics manufacturing

http//hitechuae.com/
8
CONTACT US

• HI-TECH ENG. SERVICES
• Industrial Area No. 2
• P.O. Box 19860, Sharjah, UAE
• http//hitechuae.com/

971-6-5332986