A Guide For Fire Stopping Consulttion

1

A GUIDE FOR FIRE STOPPING CONSULTATION
2
Plan Firestopping At The Right Time Based on the
sale of the new project, the fire stopping plan
needs to be taken care of. There are three stages
of it, including Stage 0, Stage 1, and Stage 2.
There stage 2 allows conversing regarding fire
safety planning. The client is responsible for
getting the team of consultants and contractors.
The engineers provide methods of cost-effective
solutions.
3
Engage The Right People When you are at the
planning phase, you must engage a design team
having the quality of three Cs (competence,
cooperation, and coordination). The design team
has the collective duty of delivering the
functional requirements for the project. The team
of fire protection specialists Dublin must focus
on submitting design details, which should pass
the planning approval without any issues.
However, fire engineers are not kept through the
complete project.

4

A strong submission A strong submission is
needed in the RIBA Stage 4 technical design
phase. The detailed plan must demonstrate how the
regulation will be met and the ways the risks are
managed. The regulator will specify the
inspection rule at the right level for the
scheme. A perfect design must consider all the
aspects to stop the fire within the facility.
5
Avoiding onsite design liability The cohesive
approach in stage 4 will reduce the risk of the
onsite designs and implement the associated
liability risk with the design. The whole design
work needs to be completed within stage 5.
Third-party certification that is CE marking and
the primary test is the evidence for any of the
proposed alternative fire stopping solution
provided. However, where there is no scope of
third-party checking, the contractor can seek
advice from another expert.
6
Firestopping quality control Based on the
project size, it is better to prepare a mock-up
of the different fire stopping solutions as per
the design. Further, an example should be there
about how all the firestopping items will be
installed with a proper set of instructions and
product references by the team of fire protection
specialists Dublin. It will help the quality
inspection team to conduct the audit properly.
7
Quality checks Checking quality is an essential
aspect of fire safety planning. No matter the
contractor confirms that all the safety checking
has been done under supervision, all must be
checked again. Apart from the internal checking,
third-party checking should be conducted. The
quality check will ensure that all the things are
verified and the system is accepted by the client.
8
Thank You
To know more visit https//bmfire.ie/