Solution For HP Printer In Error state (817)-442-6643

1
How to Fix HP Printer In Error State (817)
442-6643 HP Support
2

• The HP printer in error state is one of the
  prevalent issues dealt with by HP printer users.
• HP has established itself as a sought-after
  printer brand. The plethora of models suitable
  for varied utility and price range makes it an
  ideal choice for customers all across the globe.
  No doubt HP is a world-class brand, however,
  encountering the HP Printer In Error State is
  quite common. If you are facing this issue and
  are struggling to find an effective solution to
  it, you are in the right place. This article will
  talk about this HP printer error and how to
  resolve it.

3
Common Causes for HP Printer In Error State-

• The error state of an HP printer usually occurs
  whenever the printer is jammed or when the ink
  levels or quantity of paper in the feeder is low.
  Loose and faulty connections or printer not being
  closed or installed properly can also result in
  this error message.
• How to fix HP printer In Error State
• Execute HP Printer Troubleshooting-
• Ensure all the connections of the printer are
  firm and accurate.
• You could install the HP printer
  troubleshooting console. Once installed, scan
  using this application and tap Fix once the scan
  is over.
• If the above step isnt efficacious, the probable
  cause of the error might be obsolete drivers.

4
Revoke Use Printer In Offline State-

• Navigate to Control Panel and choose Devices and
  Printers
• Select Printers
• If the Printer is Offline message is displayed,
  it means Use printer in offline state is
  enabled.
• To change this setting, right-click on the
  printer, and click Use printer online.
• Try a demo print and check whether the printer is
  working or not.  

5

• Reinstall The Drivers-
• In the control panel, select Printers and
  Devices.
• Right-click on the printer and tap on Remove
  device.
• Confirm it and restart the system.
• Once the system restarts, reinstall the printer.
  The system by itself detects the printer. If
  there is any ambiguity, contact the HP Printer
  Helpline Number

6

• Automating The Printer Spooler Service
• Press Windows R and in the prompt type
  services.msc
• Locate the Print Spooler and right-click on it
  and select Properties.
• In the General console, change the Startup type
  to Automatic.
• Apply the changes.
• Restart the system to check whether the issue is
  resolved or not.
• In case any issue persists, feel free to contact
  the HP Printer customer Service for the
  resolution of your issues.