A Guide To Calibrate Leica Survey Equipment Accessories

1
A Guide To Calibrate Leica Survey Equipment
Accessories
2

• Leica Survey equipment accessories and
  calibration are helpful in improving the
  proficiency of the instruments being used. The
  right Leica equipment and accessories calibrated
  from an approved laboratory at a specific time
  can give you a good quality measurement.
• It will also ensure that your equipment is
  focused on industry mistakes and that efficient
  results are obtained each time other
  organizations will trust and quote. Heres an
  easy guide to calibrating Leica Survey Equipment
  Accessories.

3
When to calibrate your Leica Survey Equipment?

• It would help if you kept examining your
  equipment to determine an ideal time for
  calibration. The timing of equipment calibration
  or testing depends on a variety of factors.

4
These include

• Purchase date
• Last date of calibration
• Equipment condition
• Errors being obtained
• Damaged equipment
• Equipment malfunctioning
• Change in reflectors
• Equipment repair

Calibration will ensure that accurate reading is
obtained each time.
5
Selecting the correct calibration method and
eliminating levelling errors

• The next step is to select the correct
  calibration method. This will be based on the
  type of equipment and the kind of error or
  deflection it shows. This can be done via the
  field procedure bubble method, Two peg method,
  and known baseline method.

6

1. Field Procedure

• Because of instrument misadjustment, the standard
  and safest way to minimize levelling errors is to
  pursue the tradition of holding back sights as
  close to equal as possible to the time checked.
• This setup and the complete back sights and
  foreheads should be followed.

7
2. Bubble Method

• The circular bubble adjustment is a two-step
  operation. The bubble in the circle is first
  adjusted and turned to 180 to level it. Next,
  the bubble adjustment screws are moved, and the
  bubble is repurchased halfway to the middle of
  the circle. These steps are repeated until the
  bubble starts remaining static in the circle.

8
3. Two Peg Test

• The two peg tests were done extensively for Leica
  survey equipment. This is based on the assumption
  that, in theory, the line of sight through the
  level is lying on the plane. It measures the gaps
  between the instrument and the rod. These are
  equal, and the errors are cancelled. It thus
  works by providing the real difference between A
  and B in height.

9

• Leica Survey equipment accessories and
  calibration are helpful in improving the
  proficiency of the instruments being used. The
  right Leica equipment and accessories calibrated
  from an approved laboratory at a specific time
  can give you a good quality measurement. For the
  best quality, Leica survey equipment accessories,
  contact Falcon Geomatics today. Their highly
  affordable prices and good quality makes them a
  perfect choice.

10
Contact
Details

• Ahammed Kamal Warehouse 6
• Street 10C, Ras al Khor Industrial 1,
  PO.Box.238544,
• Dubai, United Arab Emirates
• 971 4 327 9333
• sales_at_falcon-geosystems.com

11
THANK YOU