How are Colored Epoxy Flakes Applied

1
How are Colored Epoxy Flakes Applied?

• Give your floor a new look. Take it to the next
  level by sprinkling colored epoxy flakes. Get it
  done from the epoxy flooring contractors in
  Melbourne. 

2
Apply A Primer or a Base Coat of 100 Solids   

• If the prepared floor is highly porous or if it
  shows a surface defect, you must consider
  applying a pure primer coat before the first
  broadcast coat. 

3
How To Spread Colored Epoxy Chips? 

• If you choose to go with partial broadcast,
  your goal should be to get a good even spread
  onto the floor at the coverage that looks good to
  the eyes.  

4
Partial Broadcast 

• In this, the floor will be ready for the
  protective topcoat once you remove the colored
  epoxy chips that are protruding irregularly.  

5
Apply A Protective Topcoat 

• You can also do an additional topcoat if desired.
  Contact Tuff Build for colored epoxy flooring
  services in Melbourne.  

6
Full Broadcast 

• First remove all the loose chips that did not
  stick to the floor. You can also use an electric
  blower or a broom to push them to one side of the
  room then scoop or vacuum them up.   

7
Contact Us

• 5 Lord Place, Point Cook, Vic, 3030, Australia 
• info_at_tuffbuild.com.au 
• 61 432 521 274 
•   
• Content Resource- https//tuffbuild.com.au/how-ar
  e-colored-epoxy-flakes-applied/ 

8
Thank You