Steel Frame Structure: Types & Costs

1
WWW.XSTRUCTURAL.COM
STEEL FRAME STRUCTURE TYPES COSTS
617-304-1462
2
WWW.XSTRUCTURAL.COM
Introduction
While the term "alloy" has been used to refer to
a material that has been used on a regular basis,
it has also been used to refer to a material that
has been used on a regular basis. One of the main
reasons for this has been the inefficient process
of mass production for sill replacement
contractor Newton in general, which is why the
first use of steel frame structures dates only
from the late 19th century.
617-304-1462
3
Shortcomings And Advantages of Steel Frames
617-304-1462
4
WWW.XSTRUCTURAL.COM
Mass Fabrication
When deciding between different materials, it's
important to remember that steel is the most
easily mass-produced in a wide range of sizes and
shapes.
5
WWW.XSTRUCTURAL.COM
No Pest or Insect-related Weaknesses
Steel is straight-out immune to the degradation
caused by either mammals or burrowing insects.
6
WWW.XSTRUCTURAL.COM
Resistance to Fire
Steel has excellent fire resistance, with little
to no potential for fire spread and the ability
to improve this parameter with flame-resistant
coatings. But there is a catch, which we will
discuss when we discuss the disadvantages or
termite damage repair contractor South Boston.
7
WWW.XSTRUCTURAL.COM
Durability
Steel is both stronger and lighter than a typical
wooden frame, removing the board's entire
durability issue.
8
WWW.XSTRUCTURAL.COM
Moisture And Other Factors
While steel is not impervious to various types of
moisture, it is highly resistant to corrosion. It
can be improved by changing the nature of the
alloy or by using various coatings and treatments
to improve steel's rust resistance - which is
critical for specific structure types such as
bridges that are constantly exposed to various
weather effects.
9
WWW.XSTRUCTURAL.COM
Low Energy Retention
While steel is relatively heat resistant, its
thermal conductivity parameters are far too high
for it to be an effective material for retaining
energy in a building. This issue may be partially
alleviated by various insulation measures, but it
is still something you will have to live with one
way or another.
10
WWW.XSTRUCTURAL.COM
Precision Is a Requirement
With timber frames, there is always some leeway
for on-site adjustments, such as trimming
components to size or nailing joints together.
11
WWW.XSTRUCTURAL.COM
A Lot of Supplementary Structures
Steel frame structures are also heavily reliant
on various structural elements, such as
insulation, drywall, sheathing, and even various
wooden components.
12
WWW.XSTRUCTURAL.COM
Timber Frames And Steel Frames- Whats The Cost?
While there are many other factors to consider
when comparing different frame materials, one
stands out above the rest the cost of building a
frame with a specific material. This is where the
majority of the cost difference comes from,
including installation and production costs.
617-304-1462
13
WWW.XSTRUCTURAL.COM
Conclusion
As you can see, steel frames have their own use
cases where they excel, primarily with industrial
structures, multi-story buildings, and so on.
However, we've also attempted to be reasonably
objective, listing both the benefits and
drawbacks of steel frames as a whole, so that
your decision is informed and based on complete
knowledge of the subject.
617-304-1462
14
(No Transcript)