5 Suggestions For Effectively Utilizing A Shampooer To Clean Your Carpet

1
5 Suggestions For Effectively Utilizing A
Shampooer To Clean Your Carpet
2
1. Prepare your carpet and areas to be shampooed

• Go through the direction of your carpet and
  understand and identify the type of cleaning
  solution that will best suit your carpet.
• Remove all furniture from the room and then start
  vacuum cleaning to remove loose dust and dirt
  from the carpet.
• Use appropriate attachments and concentrate to
  clean high-traffic areas, corners, and spaces
  where the carpet meets the wall.
• Now take a spot test with the shampoo.
• Take your carpet cleaning shampoo and spray it on
  the spot directly.(Use Prochem fibre shampoo).
• Stat dabbing with a cloth and apply a vacuum
  cleaner now-remove all dust, and allergens as
  much as you can.

3
2. Prepare the carpet shampooing machine

• Follow the manufacturers guidelines and fill the
  clean water tank with water and Prochem fibre
  shampoo.
• Make sure, you are using the appropriate amount
  of shampoo-not more or less, as that can turn
  dirt more clingy towards the carpet or fabric
  products.
• Read all the instructions regarding the direction
  to use carpet shampoo carefully.
• Choose a carpet shampooer that works as an
  extractor with a clean water rinse cycle.

4
3. Now you are ready to shampoo your carpet

• Take time, plan, and then execute the cleaning
  job-dont rush.
• Clean the carpet thoroughly and pass the cleaning
  device several times on a particular spot.
• Stop and replace the dirty water of the reservoir
  with clean water
• and repeat the process whenever required during
  cleaning.
• Use forward and reverse strokes on the carpet
  surface.
• Move in and up direction throughout the carpet
  surface and refill the tank with cleaning
  solution whenever you feel it is necessary.
• After you finish the shampooing, now run a tank
  of water all over the spot and rinse out the
  shampoo along with soiling dust.

5
4. After shampooing

• Put your hand on the carpet and see whether any
  residue moisture is left on the carpet. If you
  feel it so-then suction the carpet further.
• Wipe out the furniture and fittings that are
  placed adjacent to the carpet.
• Leave the place to dry before you place the
  furniture back there. For smaller rooms wait for
  2 to 3 hours, and for larger spaces-leave it to
  dry at least for 1 day.
• Use a towel before you step down on the carpet if
  it is not dried up completely-better to avoid
  entering the room for a while.
• Vacuum the carpet once it becomes dry to remove
  any loose particles or pollutants.

6
5. Cleaning Frequency

• Set up your cleaning routines based on how much
  traffic a carpet receives.
• Carpets that receive foot traffic regularly need
  to be cleaned once or twice per year.
• A carpet that is placed in a room that receives
  less traffic, needs a shampooing treatment at
  least once in a gap of 18 months.
• The carpet having light needs frequent washing.
  (Use Prochem fibre shampoo)

7
Thank Youwww.clenlidirect.com