Introduction to The Various Categories of Cable Trays Manufactured by Indian Companies

1
WELCOME TO TANYA GALVANIZERS

• Introduction to The Various Categories of Cable
  Trays Manufactured by Indian Companies

2

• The power distribution and the communication
  industries alike has a larger dependency on
  managing cable as the wires that gets utilized in
  the distribution of power and communications
   requires  to get extended and interleaved in
  such a manner so that the hazards like the
  breaking out of the fire gets to check. Cable
  tray plays a crucial role in both of these
  industries.
• These trays have its utilization to channelize
  the wire in the manner intended and the trays are
  considered an indispensable component across
  varied industries that include the construction
  industry. Accessories like the cable ducts,
  similarly, have great importance in purposes like
  cable jetting. 

3
Different Categories of the Cable Tray 

• Stepladder Cable Trays -
• Stepladder systems find the maximum of its uses
  in power distribution. These cable ducts
  accessory appears in the scene in steps to secure
  the cables in the effective manner. These get
  installed with the efforts of the specialists in
  the application .

4
Channel Cable Trays -

• Trough or the channel trays are generally used to
  support wires of comparatively lesser sizes that
  range between five to twelve feet in length. This
  category of trays supports those cables that
  yield lesser amount of heat. These trays for
  cables allow a smaller extent of ventilation.
  These trays can be formed either of metallic or
  nonmetallic materials.

5

• Single Cable Rail -
• These categories of cable ducts can be installed
  very easily. It can be availed in either single
  or multiple tiers. Typically, these are ten to
  twelve feet in length that can be intersected
  very easily through this arrangement. It finds
  its typical application to channelize the wire in
  power systems of low and medium voltage
  capacities.

6

• Wire Basket -
• This category of trays finds its application
  across the telecommunication industry
  specifically. It is the idealistic suits the
  wires of low voltage and fiber optics. Usually,
  it is manufactured out of steel and in some
  cases, it can be availed with a lamination of
  zinc on it too. Cables between three to eight
  feet in length can be channelized easily through
  this category of the tray.

7
Contact Us -

• Address - Plot No. 289-290, Manjusar GIDC, Nr.
  Bombardier Circle, Manjusar Savli, Vadodara
  391775.
• Phone - [phone] (O)
• Phone- 91 8000842648
• Email- info_at_galvanizers.co.in
• Website - https//www.galvanizers.co.in/