PACS Instrument Intermediate Design Review (IIDR)

1
PACS Instrument Intermediate Design Review
(IIDR)
Integration and Testing

• Reinhard Katterloher

2
AIV and Testing

• The Test Plan describes the baseline for the
  activities required for all tests under MPE
  responsibility including the test facilities
• Dedicated DV Plans covering all AIV activities
  incl. test reports are issued and enforced by the
  manufacturers of items deliverable to MPE
• In the following, Test Sequences combined with
  AIV/Test Schedules are shown to illustrate those
  activities, where the main effort is spent and
  which require most of the available test time

3
Test Level Component Tests at MPE

• GeGa Detector Module

4
QM Detector Module 8 Design Verification
(Environmental Testing)
5
QM Detector Module 8 Design Verification
(Environmental Testing)
6
QM Detector Module 8 Spectral Calibration and
Glitch Investigation
7
Readout and Control Scheme for Detector Module
Testing
8
QM Detector Module 8 Spectral Calibration and
Glitch Investigation
9
Test Level Subsystem Tests at MPE/MPIA

• GeGa Detector Modules and Array AIV

10
AIV of QM GeGa Detector Arrays
11
AIV of QM GeGa Detector Arrays
12
Configuration of CQM Array
SKY
FPU
13
AIV of FM GeGa Detector Arrays
14
AIV of FM GeGa Detector Arrays
15
AIV of FS GeGa Detector Arrays
16
AIV of FS GeGa Detector Arrays
17
Test Level ILT at MPE

• Instrument

18
General Instrument AIV Sequence
19
Overall Configuration of ILT Set-up
20
AVM Instrument Test Sequence
21
AVM Instrument Test Sequence
22
EMC Conducted Susceptibility Test (common mode)
for Signal Lines
23
CQM/AVM Instrument Test Sequence
24
CQM/AVM Instrument Test Sequence
25
PFM Instrument Test Sequence
26
PFM Instrument Test Sequence
27
FS Instrument Test Sequence
28
FS Instrument Test Sequence