Rainwater Reuse Modeling - PowerPoint PPT Presentation

1 / 15
About This Presentation
Title:

Rainwater Reuse Modeling

Description:

To provide an economically viable alternative to municipal water ... urban area and more geared towards overland flow, swales, etc. for suburban or rural areas. ... – PowerPoint PPT presentation

Number of Views:62
Avg rating:3.0/5.0
Slides: 16
Provided by: jaymo6
Category:

less

Transcript and Presenter's Notes

Title: Rainwater Reuse Modeling


1
Rainwater Reuse Modeling
  • Houston Land/Water Sustainability Forum
  • June 17, 2009

Jay Morris
2
Introduction
  • Goals
  • Questions to Obtain Goals
  • Rainwater Runoff Quantity
  • Storage Volume
  • Selecting Areas to Capture
  • Rainfall Data Supply
  • Usage Demand
  • How Supply and Demand Affect a Model
  • Return on Investment (ROI)
  • Recap

3
Goals
  • To provide an economically viable alternative to
    municipal water for non-potable uses.
  • Achieve a LEED point for SS Credit 6.1. Case 1
    (site less than 50 impervious)
  • prevent the post-development peak discharge
    rate and quantity from exceeding the
    pre-development peak discharge rate and quantity

4
Questions to Obtain Goals
  • What is the difference in runoff quantities from
    pre-developed to post-developed conditions?
  • How much water should be stored?
  • From where should water be collected?
  • What can the water be used for?
  • How can supply and demand be balanced?
  • What is the ROI?

5
Rainwater Runoff Quantity
The change in the runoff volume is the volume to
be infiltrated into the soil or reused onsite to
achieve LEED SS Cr. 6.1. In Houston
infiltration is limited due the soils low
percolation rate.
?V Aimp (?CRunoff )(d2year)
  • ?V Change in Volume of Runoff (CF)
  • AImp Total Impervious Area (SF)
  • ?CRunoff Change in Runoff Coefficient (SF)
  • d2year Depth of 2-Year 24-Hour Rainfall (FT)

6
Rainwater Runoff QuantityExample
?V Aimp (?CRunoff )(d2year)
  • 10,000 SF of impervious area is proposed for a
    development in Fort Bend County. The
    pre-developed runoff coefficient is assumed to be
    0.35 and the impervious area runoff coefficient
    is assumed to be 0.95. The Fort Bend County
    Drainage Criteria Manual References TP-40 which
    states that the point rainfall amount (depth) of
    the 2-year 24-hour storm is 4.90 inches for Fort
    Bend County.
  • AImp 10,000 SF, ?CRunoff 0.95-0.35 0.60,
    d2year 4.90 IN
  • ?V 10,000 SF x 0.60 x (4.90 IN/ 12IN/FT)
    2,450 CF
  • 2,450 CF (7.48 Gal/CF) 18,326 Gal

7
Storage Volume
  • Calculating the runoff volume for the 2-year
    24-hour storm establishes the minimum volume
    needed to meet LEED SS Credit 6.1.
  • The volume needed can also be driven by upfront
    cost, desired drawdown time, and available site
    area.
  • If the difference in pre and post-developed
    2-year 24-hour runoff volumes is not stored and
    reused, LEED SS Credit 6.1 will be difficult to
    achieve.

8
Selecting Areas to Capture
  • This process will be site specific and will
    likely involve collection from roof drains in an
    urban area and more geared towards overland flow,
    swales, etc. for suburban or rural areas.
  • Natural drainage patterns will also affect what
    areas can be captured.
  • The sites outfall location(s) shall also be
    considered.

9
Selecting Areas to Capture
10
Rainfall Data Supply
  • Actual Daily Data vs. Monthly Average Data
  • Daily data will more accurately depict how often
    the storage volume will go dry.
  • Rainfall data for at least 10 years is preferred.
  • Daily rainfall data is available at
    www.srh.noaa.gov for most major airports and a
    number of other monitoring locations.

11
Usage - Demand
  • Potential uses include irrigation, greywater,
    condensers, fire suppression, livestock,
    fountains and pools.
  • Usage estimates can be determined from a variety
    of different sources including water bills,
    manufacturer specifications and many resources
    available online.
  • Consider seasonal usage when appropriate.
  • Account for evaporation from ponds and pools.

12
How Supply and Demand Affect a Model
  • EXCEL MODEL

13
Return on Investment
  • The most basic estimate
  • (1- Empty)(Yearly Usage)(Water Rate) Yearly
    Savings
  • Yearly Savings/Upfront Cost Years to Payback
  • This does not account for storm sewer savings,
    the rising cost of water, maintenance costs, etc.

14
Recap
  • Determined Storage Volume
  • Delineated Areas to Capture
  • Quantified Available Rain
  • Quantified Usage
  • Combined All Variables to Determine the Systems
    Functionality

15
References
  • Technical Paper No. 40
  • http//www.nws.noaa.gov/oh/hdsc/PF_documents/Techn
    icalPaper_No40.pdf
  • Southeast Texas Climate Data
  • http//www.srh.noaa.gov/hgx/climate.htm
  • Texas Manual on Rainwater Harvesting
  • http//www.twdb.state.tx.us/publications/reports/R
    ainwaterHarvestingManual_3rdedition.pdf
  • City of Houston Discharge Criteria for
    estimating usage
  • http//documents.publicworks.houstontx.gov/documen
    t-center/planning-and-development-services-divisio
    n/dicharge-criteria-sheet/details.htm
Write a Comment
User Comments (0)
About PowerShow.com