Hydraulic Ram for Fuel-free Water Lifting - PowerPoint PPT Presentation

About This Presentation
Title:

Hydraulic Ram for Fuel-free Water Lifting

Description:

Hydraulic Ram for Fuel-free Water Lifting By Roberto A. Alaban, Jr. Design|Fabrication|Installation Technology transfer|Consultancy – PowerPoint PPT presentation

Number of Views:809
Avg rating:3.0/5.0
Slides: 22
Provided by: raa97
Category:
Tags: free | fuel | hydraulic | lifting | ram | water

less

Transcript and Presenter's Notes

Title: Hydraulic Ram for Fuel-free Water Lifting


1
Hydraulic Ram for
Fuel-free Water Lifting
By Roberto A. Alaban, Jr. DesignFabricationInsta
llation Technology transferConsultancy
Mobile 0928 763 2788 E-mail redrichfrost_at_yahoo.c
om Website http//ra-initiatives.tripod.com
2
What is a Hydraulic Ram?
The hydraulic ram pump may be defined as a
self-acting device that uses the energy of a
large volume of water falling from a higher
location (relative to the ram) and passing
through it, to lift a small volume to a location
significantly higher than the ram and the source
of water. It has only 2 moving parts.
3
Characteristics of a Hydraulic Ram Water-Lifting
System
  • (1) there is no other external energy input
    (e.g. human,
  • animal, fossil fuel, etc.) that makes the
    ram
  • work other than the energy of water
    passing
  • through the pump

(2) its operation will continue 24 hours a day,
seven days a week so long as the
required volume of water continues to
flow through it,
(3) water has to come from a location higher
than the ram
4
Characteristics of a Hydraulic Ram Water-Lifting
System
  • (4) only a small portion of this water (around
    25 or
  • less) is pumped up, the remainder passing
    out of the
  • ram and must be drained to a lower
    location

(5) the vertical distance to which water can
be pumped up from the ram is
significantly higher than the vertical
distance from its source to the ram up
to 30 meters delivery height per 1 meter
of supply fall, although typically the most
efficient is within a ratio of 101 or
less, and
5
Characteristics of a Hydraulic Ram Water-Lifting
System
  • (6) due to the rams small output per minute,
    there is a
  • need for a storage device at the point of
    delivery to
  • accumulate this output on a 24-hour basis,
    e.g. an
  • earthen pond for irrigation or ferrocement,
    metal,
  • or plastic tank for drinking water.

6
History
  • The hydraulic ram is a very old, and well-
  • proven, technology for lifting water.
  • In 1772, Englishman John Whitehurst
  • invented a manually-operated precursor
  • of the hydraulic ram called the "pulsation
  • engine." The first one he installed in 1775
  • raised water to a height of 16 ft. (4.9 m).

7
History
  • The first self-acting ram pump was invented by
    the Frenchman Joseph Michel Montgolfier in 1796
    for raising water in his paper mill (Montgolfier
    is more popularly known for his work in hot-air
    balloons).
  • The sons of Montgolfier obtained an English
    patent for an improved version in 1816 but this
    was acquired, together with Whitehurst's design,
    in 1820 by Josiah Easton, a Somerset-born
    engineer who had just moved to London.

8
History
  • Easton's firm, inherited by his son James grew
    during the nineteenth century to become one of
    the more important engineering manufacturers in
    the United Kingdom, with a large works at Erith,
    Kent. They specialised in water supply and
    sewerage systems world-wide, as well as land
    drainage projects. The Eastons had a good
    business supplying rams for water supply purposes
    to large country houses, and also to farms and
    village communities, and a number of their
    installations still survive up to this day.

9
History
  • In 1929 the company was acquired by Green
    Carter, of Winchester, Hampshire, who were
    engaged in the manufacturing and installation of
    the well-known Vulcan and Vacher rams. Green
    Carter now function from Ashbrittle, near
    Wellington, Somerset, U.K.

10
Ram Pumps in the 21st century
  • In recent years there has been a resurgence of
    interest in hydraulic rams, particularly in
    developing countries, due to the continuing rise
    in fossil-fuel prices.
  • In India, Vietnam, and China their
    governments are very active in constructing
    hydraulic ram systems and in disseminating the
    technology to the countryside for irrigation and
    drinking water (a German group is leading the
    effort in Vietnam and China). In Africa
    (Zimbabwe), a British group has been active in
    this field since 1994.

11
Ram Pumps in the 21st century
  • Surprisingly, in the Philippines the ram pump is
    still a relatively unknown technology and has not
    been part of the governments program for
    irrigation or potable water delivery. Even more
    surprising, many technically-trained individuals
    (engineers) have not heard about a ram pump and
    could not believe that water can be continuously
    pumped to a location much higher than its source
    by water inertia alone, by a pump that has only
    two moving parts!

12
Ram Pumps in the 21st century
  • Even in the countrys premier agricultural
    engineering school the hydraulic ram is taught
    mainly in theory and in passing, and one
    agricultural engineering professor has dismissed
    it for water-lifting work as inefficient because
    it can pump only a small portion of the total
    volume of water that passes through it (even
    though the fuel expense is totally zero).

13
Parts of a Hydraulic Ram
The ram pump is a very old technology, and for
over two centuries many designs have been tried.
Today, rams come in a variety of shapes and
sizes, yet many of the incorporated
modifications are mere variations of the same
theme, and the basic design consist almost always
of the following ram body, impulse valve,
delivery valve, air snifter, and air chamber.
14
Parts of a Hydraulic Ram
Shown is Chinook MP-2 2-inch ram designed by the
author
Air chamber
Delivery pipe stub
Impulse valve
Delivery valve
Air snifter
Body
Drive pipe stub
Feet
15
Parts of a Hydraulic Ram
Shown is a large-bore Chinese-made hydraulic ram
pump
Air chamber
Delivery pipe stub
Impulse valve
Delivery valve
Air snifter
Body
Drive pipe stub
Feet
16
Parts of a Hydraulic Ram
Different forms, same substance
Delivery pipe stub
Drive pipe stub
Air chamber
Delivery valve
Impulse valve
Air snifter
Body
Feet
17
TYPICAL COMPONENTS OF A HYDRAULIC RAM
WATER-LIFTING SYSTEM
Service area/Storage facility (not shown)
Source (river, stream, spring)
Supply pipe
Delivery pipe
Drive tank
Lift (Delivery head)
Drive pipe
Hydraulic Ram pump
Fall (Drive head)
18
COST OF A HYPOTHETICAL HYDRAULIC RAM SET UP with
2-INCH RAM Assuming data as shown
Estimated output (Fall Volume 0.60)/Lift
(3 120 0.60)/20 10.8 liters/minute
15,552 liters/day
Delivery pipe 60 m
Supply pipe 30 m
Lift, 20 m
Drive pipe 12 m
Hydraulic Ram pump, 2 inches
Fall, 3 m
Source flow rate 120 liters/minute
19
COST OF A HYPOTHETICAL HYDRAULIC RAM SET UP with
2-INCH RAM (Direct material costs, excluding
labor and optional dam)
(Off-the-shelf) Supply pipe 2-inch
commercial grade HDPE pipe, 60 meters P
1,500.00 Drive tank 220-liter PVC
drum
900.00 Drain pipe
g.i. nipple 1 x 6 , sched. 40, 1 pc.
-- 45.00 Gate
valve 1 , 1 pc.

125.00 Drive pipe 2-inch g.i. pipe,
schedule 40 , 2 lengths
2,600.00 G.i. coupling, 2 inches, 1
pc.
85.00 G.i.
union, 2 inches, 1 pc.

105.00 G.i. nipple, 2 x 6, sched.
40, 2 pcs.
140.00 PVC ball valve,
2 inches, with threaded ends
280.00 G.i. union,
1 ¼, 1 pc.
-- 65.00
G.i. nipple, 1 ¼ x 4, sched. 40, 1
pc. --
55.00 Swing
check valve, 1 ¼ , 1 pc.
-- 215.00
Delivery pipe 1 ¼ commercial grade HDPE
pipe, 60 meters -- 750.00
Cement for drive tank and
hydraulic ram base, 3 bags --
600.00 Mixing sand

-- 200.00
Miscellaneous
--
500.00 (Fabricated) 2-inch
hydraulic ram pump
12,000.00
Ram cradle

800.00


-----------------------

Total P
20,965.00
20
LIST OF CLIENTS
  •  
  • El Nido Foundation, Palawan
    May 2006
  • Nono Cabatac, El Nido, Palawan
    -- May 2006
  • Victorias City Eco-park
    -- July 2006
  • Felino Javier, Rosario, Batangas
    -- September 2006
  • Dr. Nolasco, Roxas City
    -- October 2006
  • Antonio Villanueva, South Cotabato
    -- October 2006
  • Rod Plopiño, Occ. Mindoro
    -- November 2006
  • Eric Payucong, La Union
    November 2006
  • Dan Cabitac, Batanes
    -- November 2006
  • 10. Gil Montilla, Ubay, Bohol
    -- December 2006
  • Christopher Agbayani, Puerto Princesa
    December 2006
  • Reynaldo Rosales, Lipa, Batangas
    -- December 2006
  • Mike Yukor, Dumaguete
    -- January 2006
  • Betty Yap, Cebu City
    -- January 2007
  • Leyte Prov. Govt
    -- January 2007
  • Vince Emnas, Baybay, Leyte
    -- January 2007
  •  
  • Frank Colloquio, Guimaras
    -- February 2007
  • Bernardino Verano, Brookes Point, Palawan
    February 2007
  • Jun Padilla, Manila
    February 2007
  • Ramon Ko, Bacolod City
    March 2007
  • Virgie Neo, Tanay, Rizal
    -- March 2007
  • Manolo Chua, Zambales
    March 2007
  • Abelardo Dapat, Limay, Bataan
    -- March 2007
  • Juan Ochoa, Pasuquin, Ilocos Norte
    March 2007
  • Roy Castañeda, Camotes Island
    March 2007
  • Leopoldo Avecilla, Alaminos, Laguna
    March 2007
  • Atty. Jose Gangan, Ilagan, Isabela
    March 2007
  • Ruby Ann Baetiong, Manila
    -- March 2007
  • Dr. Aristeo Tantoco, Rio Tuba, Palawan
    -- March 2007
  • Metro Clark Waste Management Corp. --
    April 2007
  • George Bautista, Bamban, Tarlac
    -- April 2007
  • 32 . Aurelia Rarang, Baguio City
    -- May 2007

21
Multiple-ram set up
  • Six 4-inch hydraulic rams with a combined
    output of more than 300,000 liters per day
    irrigate around 35 hectares of farmland in
    central Negros Occidental.
Write a Comment
User Comments (0)
About PowerShow.com