ICT ERROR CODES: KING, EMPEROR, PRINCE DX. IN HOUSE

1
ICT ERROR CODES KING, EMPEROR, PRINCE DX. IN
HOUSE
KITCHEN KING KITCHN EMPEROR, PRINCE DX TROUBLE SHOOTING KITCHEN KING KITCHN EMPEROR, PRINCE DX TROUBLE SHOOTING KITCHEN KING KITCHN EMPEROR, PRINCE DX TROUBLE SHOOTING
     
SYMPTOM REASON ACTION 
No beep or LED does not blink after power is switched on  The power cord is not properly  plugged. Plug the power cord into the power socket properly.
No beep or LED does not blink after power is switched on  Internal Fuse Blown Call Customer Care.
The system Display ERP stand by, Vessel does not heat up Vessel size is not suitable Ensure the vessel is made of magnetic    conductive material and has a base  diameter larger than 8 cm
The system Display ERP stand by, Vessel does not heat up   Vessel material is Not suitable Use flat bottom vessel of recommended material only
The system Display ERP stand by, Vessel does not heat up Vessel is not placed in the center of the Ceramic Plate Place the Vessel in the circle of the ceramic plate
 Display "HIt" stand by mode Internal Temp is very high Wait till the system cools down
 Display "HIt" stand by mode FAN Defective Call Customer Care.
Display "EAE" stand by mode Vessel temperature high or Empty vessel Swtich oof the system wait till the vessel cools down
Display "EAS" stand by mode Internal sensor failure/loose / open connection Call Customer Care.
Display "EAC" stand by mode Internal induction coil failure/loose/ open connection Call Customer Care.
"LOU'  Display System is shut down in under voltage (120V)  protection Wait for correct voltage
"HIU'  Display System is shut down in over voltage (280V)  protection Wait for correct voltage
     
2
ICT ERROR CODES PRINCE
3
ICT ERROR CODES QUEEN IN HOUSE
4
ICT ERROR CODES GALAXY GALAXY PRO
5
ICT ERROR CODES ASTRO
6
ICT ERROR CODES SMART COOK
7
ICT ERROR CODES CAPTAIN