First, system reaches equilibrium - PowerPoint PPT Presentation

1 / 34
About This Presentation
Title:

First, system reaches equilibrium

Description:

reactants are constantly forming products and vice-versa ... formic acid. H(CHO2) 1.78 E-4. 3.75. sulfurous acid (2) (HSO3)- 6.31 E-8. 7.20. heptanoic acid ... – PowerPoint PPT presentation

Number of Views:475
Avg rating:3.0/5.0
Slides: 35
Provided by: Robert80
Category:

less

Transcript and Presenter's Notes

Title: First, system reaches equilibrium


1
Chemical Equilibrium
  • Introduction
  • 1.) Equilibria govern diverse phenomena
  • Protein folding, acid rain action on minerals to
    aqueous reactions
  • 2.) Chemical equilibrium applies to reactions
    that can occur in both directions
  • reactants are constantly forming products and
    vice-versa
  • At the beginning of the reaction, the rate that
    the reactants are changing into the products is
    higher than the rate that the products are
    changing into the reactants.
  • When the net change of the products and reactants
    is zero the reaction has reached equilibrium.

Then, system continually exchanges products and
reactants, while maintaining equilibrium
distribution.
First, system reaches equilibrium
Product
Reactants
At equilibrium the amount of reactants and
products are constant, but not necessarily equal
2
Chemical Equilibrium
  • Equilibrium Constant
  • 1.) The relative concentration of products and
    reactants at equilibrium is a constant.
  • 2.) Equilibrium constant (K)
  • For a general chemical reaction

Equilibrium constant
Where - small superscript letters are the
stoichiometry coefficients - A concentration
chemical species A relative to standard state
3
Chemical Equilibrium
  • Equilibrium Constant
  • 2.) Equilibrium constant (K)
  • A reaction is favored when K gt 1
  • K has no units, dimensionless
  • - Concentration of solutes should be expressed as
    moles per liter (M).
  • - Concentrations of gases should be expressed in
    bars.
  • ? express gas as Pgas, emphasize pressure
    instead of concentration
  • ? 1 bar 105 Pa 1 atm 1.01325 bar
  • - Concentrations of pure solids, pure liquids and
    solvents are omitted
  • ? are unity
  • ? standard state is the pure liquid or solid
  • 3.) Manipulating Equilibrium Constants

Consider the following reaction
Reversing the reaction results in a reciprocal
equilibrium reaction
4
Chemical Equilibrium
  • Equilibrium Constant
  • 3.) Manipulating Equilibrium Constants

If two reactions are added, the new K is the
product of the two individual K values
K1
K2
K3
5
Chemical Equilibrium
  • Equilibrium Constant
  • 3.) Manipulating Equilibrium Constants
  • Example

Given the reactions and equilibrium constants
Kw 1.0 x 10-14
KNH3 1.8 x 10-5
Find the equilibrium constant for the reaction
Solution
K1 Kw
K21/KNH3
K3Kw1/KNH35.6x10-10
6
Chemical Equilibrium
  • Le Châteliers Principal
  • 1.) What Happens When a System at Equilibrium
    is Perturbed?
  • Change concentration, temperature, pressure or
    add other chemicals
  • Equilibrium is re-established
  • Reaction accommodates the change in products,
    reactants, temperature, pressure, etc.
  • Rates of forward and reverse reactions
    re-equilibrate

7
Chemical Equilibrium
  • Le Châteliers Principal
  • 1.) What Happens When a System at Equilibrium
    is Perturbed?
  • Le Châteliers Principal
  • - the direction in which the system proceeds
    back to equilibrium is such that the change is
    partially offset.

Consider this reaction
At equilibrium
To return to equilibrium (balance), some (not
all) CO and H2 are converted to CH3OH
Add excess CO(g)
If all added CO was converted to CH3OH, then
reaction would be unbalanced by the amount of
product
8
Chemical Equilibrium
  • Le Châteliers Principal
  • 2.) Example

Consider this reaction
At one equilibrium state
9
Chemical Equilibrium
  • Le Châteliers Principal
  • 2.) Example

What happens when
According to Le Châteliers Principal, reaction
should go back to left to off-set dichormate on
right
Use reaction quotient (Q), Same form of
equilibrium equation, but not at equilibrium
10
Chemical Equilibrium
  • Le Châteliers Principal
  • 2.) Example

Because Q gt K, the reaction must go to the left
to decrease numerator and increase
denominator. Continues until Q K 1. If the
reaction is at equilibrium and products are added
(or reactants removed), the reaction goes
to the left 2. If the reaction is at
equilibrium and reactants are added ( or products
removed), the reaction goes to the right
11
Chemical Equilibrium
  • Le Châteliers Principal
  • 3.) Affect of Temperature on Equilibrium

1. Equilibrium constant of an endothermic
reaction (DHo ) increases if the
temperature is raised. 2. Equilibrium
constant of an exothermic reaction (DHo
-)decreases if the temperature is
raised.
D
DH
D
DH -
12
Chemical Equilibrium
  • Solubility Product
  • 1.) Equilibrium constant for the reaction
    which a solid salt dissolves to give its
    constituent ions in solution
  • Solid omitted from equilibrium constant because
    it is in a standard state
  • Example

13
Chemical Equilibrium
  • Solubility Product
  • 1.) Saturated Solution contains excess,
    undissolved solid
  • Solution contains all the solid capable of
    dissolving under the current conditions
  • EXAMPLE
  • Find Cu2 in a solution saturated with
    Cu4(OH)6(SO4) if OH- is fixed at 1.0x10-6M.
    Note that Cu4(OH)6(SO4) gives 1 mol of SO42- for
    4 mol of Cu2?

14
Chemical Equilibrium
  • Solubility Product
  • 2.) If an aqueous solution is left in contact
    with excess solid, the solid will dissolve until
    the condition of Ksp is satisfied
  • Amount of undissolved solid remains constant
  • Excess solid is required to guarantee ion
    concentration is consistent with Ksp
  • 3.) If ions are mixed together such that the
    concentrations exceed Ksp, the solid will
    precipitate.
  • 4.) Solubility product only describes part of the
    solubility of a salt
  • Only includes dissociated ions
  • Ignores solubility of solid salt

15
Chemical Equilibrium
Common ion effect a salt will be less soluble
if one of its constituent ions is already present
in the solution.
Decrease in the solubility of MgF2 by the
addition of NaF
PbCl2 precipitate because the ion product is
greater than Ksp.
16
Chemical Equilibrium
  • Common Ion Effect
  • 1.) Affect of Adding a Second Source of an Ion
    on Salt Solubility
  • Equilibrium re-obtained following Le Châteliers
    Principal
  • Reaction moves away from the added ion
  • EXAMPLE

Find Cu2 in a solution saturated with
Cu4(OH)6(SO4) if OH- is fixed at 1.0x10-6M and
0.10M Na2SO4 is added to the solution.
17
Chemical Equilibrium
  • Complex Formation
  • 1.) High concentration of an ion may
    redissolve a solid
  • Ion first causes precipitation
  • Forms complex ions, consists of two or more
    simple ions bonded to each other

ppt. formation
Complex forms and redissolves solid
18
Chemical Equilibrium
  • Complex Formation
  • 2.) Lewis Acids and Bases
  • M acts as a Lewis acid ? accepts a pair of
    electrons
  • X- acts as a Lewis base ? donates a pair of
    electrons
  • Bond is a coordinate covalent bond

adduct
ligand
Lewis base
Lewis acid
19
Chemical Equilibrium
  • Complex Formation
  • 3.) Affect on Solubility
  • Formation of adducts increase solubility
  • Solubility equation becomes a complex mixture of
    reactions
  • - dont need to use all equations to determine
    the concentration of any species

Ksp
Implies low Pb2 solubility
Only one concentration of Pb2 in solution
Concentration of Pb2 that satisfies any one of
the equilibria must satisfy all of the equilibria
All equilibrium conditions are satisfied
simultaneously
20
Chemical Equilibrium
  • Complex Formation
  • 3.) Affect on Solubility
  • Total concentration is dependent on each
    individual complex species

Total solubility of lead depends on I- and the
solubility of each individual complex formation.
21
Chemical Equilibrium
  • Complex Formation
  • 3.) Affect on Solubility
  • EXAMPLE

Given the following equilibria, calculate the
concentration of each zinc-containing species in
a solution saturated with Zn(OH)2(s) and
containing OH- at a fixed concentration of
3.2x10-7M. Zn(OH)2 (s) Ksp
3.0x10-16 Zn(OH) b1 2.5 x104 Zn(OH)3- b3
7.2x1015 Zn(OH)42- b4 2.8x1015
22
Chemical Equilibrium
  • Acids and Bases
  • 1.) Protic Acids and Bases transfer of H
    (proton) from one molecule to
  • another
  • Hydronium ion (H3O) combination of H with
    water (H2O)
  • Acid is a substance that increases the
    concentration of H3O
  • Base is a substance that decreases the
    concentration of H3O
  • - base also causes an increase in the
    concentration of OH- in aqueous solutions
  • 2.) Brønsted-Lowry definition does not require
    the formation of H3O
  • Extended to non-aqueous solutions or gas phase

acid
acid
base
salt
23
Chemical Equilibrium
  • Acids and Bases
  • 3.) Salts product of an acid-base reaction
  • Any ionic solid
  • Acid and base neutralize each other and form a
    salt
  • Most salts with a single positive and negative
    charge dissociate completely into ions in water
  • 4.) Conjugate Acids and Bases

Products of acid-base reaction are also acids and
bases
A conjugate acid and its base or a conjugate base
and its acid in an aqueous system are related to
each other by the gain or loss of H
24
Chemical Equilibrium
  • Acids and Bases
  • 5.) Autoprotolysis acts as both an acid and
    base
  • Extent of these reactions are very small

water
  • - H3O is the conjugate acid of water
  • - OH- is the conjugate base of water
  • Kw is the equilibrium constant for the
    dissociation of water

Acetic acid
25
Chemical Equilibrium
  • Acids and Bases
  • 6.) pH negative logarithm of H
    concentration
  • Ignores distinction between concentration and
    activities (discussed later)
  • A solution is acidic if H gt OH-
  • A solution is basic if H lt OH-

26
Chemical Equilibrium
  • Acids and Bases
  • 6.) pH
  • Example

What is the pH of a solution containing 1x10-6 M
H?
What is OH- of a solution containing 1x10-6 M
H?
27
Chemical Equilibrium
  • Acids and Bases
  • 7.) Strengths of Acids and Bases
  • Depends on whether the compound react nearly
    completely or partially to produce H or OH-
  • strong acid or base completely dissociate in
    aqueous solution
  • - equilibrium constants are large
  • - everything else termed weak

Strong ? no undissociated HCl or KOH
28
Chemical Equilibrium
  • Acids and Bases
  • 7.) Strengths of Acids and Bases
  • weak acids react with water by donating a proton
  • - only partially dissociated in water
  • - equilibrium constants are called Ka acid
    dissociation constant
  • - Ka is small
  • weak bases react with water by removing a proton
  • - only partially dissociated in water
  • - equilibrium constants are called Kb base
    dissociation constant
  • - Kb is small

Ka
Equivalent
Ka
Kb
Equivalent
Kb
29
Chemical Equilibrium
Some Common Weak Acids (carboxylic acids)
30
Chemical Equilibrium
Some Common Weak Acids (Metals cations)
31
Chemical Equilibrium
Some Common Weak Bases (amines)
  • The Ka or Kb of an acid or base may also be
    written in terms of pKa or pKb
  • As Ka or Kb increase ? pKa or pKb decrease
  • - a strong acid/base has a high Ka or Kb and a
    low pKa or pkb

32
Chemical Equilibrium
  • Acids and Bases
  • 8.) Polyprotic Acids and Bases can donate or
    accept more than one proton
  • Ka or Kb are sequentially numbered
  • - Ka1,Ka2,Ka3 Kb1,Kb2,Kb3

33
Chemical Equilibrium
  • Acids and Bases
  • 8.) Relationship Between Ka and Kb

34
Chemical Equilibrium
  • Acids and Bases
  • 8.) Relationship Between Ka and Kb
  • EXAMPLE

Write the Kb reaction of CN-. Given that the Ka
value for HCN is 6.2x10-10, calculate Kb for CN-.
Write a Comment
User Comments (0)
About PowerShow.com