ACC Initial Presentation

1
23022 Series Evaporator

• Features
• One dynamically balanced twin shaft blower
  assembly
• with long life 12 volt DC permanent magnet
  motors with
• full ball bearings and extended life brushes.
• Orifice tube/accumulator in lieu of TXV used in
  conjunction
• with highly efficient crosshatch copper tube
  and an aluminum fin
• coil for maximum capacity output and
  durability.
• Standard manual controls or fully automatic.
  Electronic
• controls are pre-wired relays and circuit
  breakers. Relay board
• with electrical diagnostic LEDs can be mounted
  at evaporator
• or control panel at driver.
• Utilizes our uniquely designed mounting system,
  eliminating
• the need to drill holes through the roof.
• Available with heat.
• Specifications
• 40,000 BTU/hr cooling capacity
• 495 cfm
• Amp Draw High 19 amps

• Key Components
• Coil 11471511A
• Blower Assembly 26060040A
• Orifice Tube 08800502A
• Front/Rear Mount Cover 09976091A
• Side Mount Cover 09976098A

In the interests of continuous improvement,
specifications are subject to change without
notice.
2
23023 Series Evaporator

• Features
• Two dynamically balanced twin shaft blower
  assemblies
• with long life 12 volt DC permanent magnet
  motors with
• full ball bearings and extended life brushes.
• Orifice tube/accumulator in lieu of TXV used in
  conjunction
• with highly efficient crosshatch copper tube
  and an aluminum
• fin coil for maximum capacity output and
  durability.
• Standard manual controls or fully automatic.
  Electronic
• controls are pre-wired relays and circuit
  breakers. Relay board
• with electrical diagnostic LEDs can be mounted
  at evaporator
• or control panel at driver.
• Utilizes our uniquely designed mounting system,
  eliminating
• the need to drill holes through the roof.
• Available with heat.
• Specifications
• 53,000 BTU/hr cooling capacity
• 1200 cfm
• Amp Draw High 30 amps

• Key Components
• Coil 11471508A
• Blower Assembly 26060036A
• Orifice Tube 08800502A
• Front/Rear Mount Cover 09976094A
• Side Mount Cover 09976097A

3
23047 Series Evaporator
Features Larger 67,000 BTU Capacity for those
critical midsize applications. Two dynamically
balanced twin shaft blower assemblies with
long life 12 volt DC permanent magnet motors
with full ball bearings and extended life
brushes. Orifice tube/accumulator in lieu of TXV
used in conjunction with highly efficient
crosshatch copper tube and an aluminum fin
coil for maximum capacity output and durability.
Standard manual controls or fully automatic.
Electronic controls are pre-wired relays and
circuit breakers. Relay board with electrical
diagnostic LEDs can be mounted at evaporator
or control panel at driver. Utilizes our
uniquely designed mounting system, eliminating
the need to drill holes through the roof.
Available with heat. Specifications 67,000
BTU/hr cooling capacity 1400 cfm Amp Draw High
30 amps 3 speed fans 12 or 24 volts
Dimensions 42W x 10H x 19.5D Weight 60 lbs
Condenser Options 25031 78,000 BTU Skirt
Condenser 25045 78,000 BTU Rooftop Condenser
4
23036 Series Evaporator

• Features
• This heavy-duty, high capacity ceiling mount
  unit provides cooling
• for a variety of vehicles with large passenger
  compartments. It
• easily can substitute for two single blower or
  single and double AC
• units.
• Due to the unit consisting of two independent
  evaporators, it can be
• installed as A) one stand alone or tie in
  system, or B) two indepen-
• dent systems, with two you will get a 30 amp
  draw plus a 15 amp
• draw. The latter option gives the option of
  turning on either a single
• system or both systems.
• Three dynamically balanced twin shaft blower
  assemblies that
• utilize long life 12 volt DC permanent magnet
  motors with full ball
• bearings and extended life brushes.
• An orifice tube used in conjunction with highly
  efficient enhanced
• copper tube and an aluminum fin coil for
  maximum capacity.
• Standard manual controls or fully automatic.
  Electronic controls are
• pre-wired relays and circuit breakers mounted
  to the evaporator.
• Utilizes our uniquely designed mounting system
  that eliminates the
• need to drill through the roof.

• Key Components
• Coil 11471508A
• Blower Assembly 26060040A
• Orifice Tube 08800502A
• Rear Mount Cover 09976119A

5
22035 Series Evaporator

• Features
• This ceiling mount unit provides cooling to any
  bus, van, or other
• vehicles passenger compartment. The low
  profile unit is
• specifically designed for vehicles with low
  head clearance.
• An orifice tube used in conjunction with highly
  efficient enhanced
• copper tube and an aluminum fin coil for
  maximum capacity output
• and durability.
• Standard manual controls or fully automatic.
  Electronic controls are
• pre-wired with relays and circuit breakers
  mounted to the evaporator.
• durable ABS formed drain pan and outlet plenum
  with fully
• adjustable louver vents.
• Utilizes our uniquely designed mounting system
  that eliminates the
• need to drill through the roof.
• Specifications
• 30,000 BTU/hr cooling capacity
• 35,000 BTU/hr heating capacity
• 600 cfm
• Amp Draw High 20.6

Key Components Coil 11471634A Blower
Assembly 26060046A Orifice Tube 08800505A
Rear Mount Cover 09976117A
6
23046 Series Evaporator
Features Low profile design for more headroom
clearance. Two dynamically balanced twin shaft
blower assemblies with long life 12 volt DC
permanent magnet motors with full ball
bearings and extended life brushes. Orifice
tube/accumulator in lieu of TXV used in
conjunction with highly efficient crosshatch
copper tube and an aluminum fin coil for
maximum capacity output and durability. Standard
manual controls or fully automatic. Electronic
controls are pre-wired relays and circuit
breakers. Relay board with electrical
diagnostic LEDs can be mounted at evaporator
or control panel at driver. Utilizes our
uniquely designed mounting system, eliminating
the need to drill holes through the roof.
Specifications 53,000 BTU/hr cooling capacity
1200 cfm Amp Draw High 30 amps 3 speed fans
12 or 24 volts Dimensions 41.7W x 7.0H x
21.04D Weight 56 lbs
Key Components Coil 11471634A Blower
Assembly 26060046A Orifice Tube 08800505A
Rear Mount Cover 09976117A
7
23048 Series Evaporator
Features Low profile design for more headroom
clearance. One dynamically balanced twin shaft
blower assemblies with long life 12 volt DC
permanent magnet motors with full ball
bearings and extended life brushes. Orifice
tube/accumulator in lieu of TXV used in
conjunction with highly efficient crosshatch
copper tube and an aluminum fin coil for
maximum capacity output and durability. Standard
manual controls or fully automatic. Electronic
controls are pre-wired relays and circuit
breakers. Relay board with electrical
diagnostic LEDs can be mounted at evaporator
or control panel at driver. Utilizes our
uniquely designed mounting system, eliminating
the need to drill holes through the roof.
Specifications 40,000 BTU/hr cooling capacity
600 cfm Amp Draw High 15 amps 3 speed fans
12 volts Dimensions 41.7W x 7.0H x 21.04D
Weight 52 lbs
Key Components Coil 11471634A Blower
Assembly 26060046A Orifice Tube 08800505A
Rear Mount Cover 09976117A
8
23045 Series Evaporator

• Features
• Two dynamically balanced twin shaft blower
  assemblies
• with long life 12 volt DC permanent magnet
  motors with
• full ball bearings and extended life brushes.
• Orifice tube/accumulator in lieu of TXV used in
  conjunction
• with highly efficient crosshatch copper tube
  and an aluminum
• fin coil for maximum capacity output and
  durability.
• Standard manual controls or fully automatic.
  Electronic
• controls are pre-wired relays and circuit
  breakers. Relay board
• with electrical diagnostic LEDs can be mounted
  at evaporator
• or control panel at driver.
• Utilizes our uniquely designed mounting system,
  eliminating
• the need to drill holes through the roof.
• Available with heat.
• Specifications
• 55,000 BTU/hr cooling capacity
• 1200 cfm
• Amp Draw High 30 amps

• Key Components
• Coil X500-1147A
• Blower Assembly 26060040A
• Orifice Tube 08800502A
• Front Mount Cover
• Rear Mount Cover (shown)

9
23044 Series Evaporator

• Features
• One dynamically balanced twin shaft blower
  assembly
• with long life 12 volt DC permanent magnet
  motors with
• full ball bearings and extended life brushes.
• Orifice tube/accumulator in lieu of TXV used in
  conjunction
• with highly efficient crosshatch copper tube
  and an aluminum
• fin coil for maximum capacity output and
  durability.
• Standard manual controls or fully automatic.
  Electronic
• controls are pre-wired relays and circuit
  breakers. Relay board
• with electrical diagnostic LEDs can be mounted
  at evaporator
• or control panel at driver.
• Utilizes our uniquely designed mounting system,
  eliminating
• the need to drill holes through the roof.
• Specifications
• 45,000 BTU/hr cooling capacity
• 600 cfm
• Amp Draw High 15 amps

• Key Components
• Coil X500-1147A
• Blower Assembly 26060040A
• Orifice Tube 08800502A
• Front Mount Cover
• Rear Mount Cover (shown)

10
25031 Series Condenser

• Features
• Two 14 diameter fans to cover a higher
  percentage of the coil, 307 sq.
• in. moving more air than traditional
  condensers. High performance
• motors with extended brush life. Motor shafts
  are seated to the case
• which is sealed with Viton O-rings to provide
  superior water resistance.
• Counter flow coil circuitry and cross hatch
  tubing maximizes the
• refrigerant heat rejection and provides
  superior sub-cooling.
• The unit is fabricated from 16 ga. A-60
  galvanealed steel with the
• individual metal components finished with an
  E-Kote epoxy coating for
• superior durability and resistance to rust.
• Design allows for installation without having to
  cut condenser intakes in
• the skirt of the bus, (school bus only)
  providing a more aesthetic OEM
• look to the bus.
• Specifications
• 78,000 BTU/hr capacity
• 2500 cfm
• Amp Draw High 22 amps
• 12 or 24 volts

• Key Components
• Coil 11471714A
• Fan 18000005B

11
25046 Series Condenser

• Features
• Two 14 diameter fans to cover a higher
  percentage of the coil, 307 sq.
• in. moving more air than traditional
  condensers. High performance
• motors with extended brush life. Motor shafts
  are seated to the case
• which is sealed with Viton O-rings to provide
  superior water resistance.
• Counter flow coil circuitry and cross hatch
  tubing maximizes the
• refrigerant heat rejection and provides
  superior sub-cooling.
• The unit is fabricated from 16 ga. A-60
  galvanealed steel with the
• individual metal components finished with an
  E-Kote epoxy coating for
• superior durability and resistance to rust.
• Design allows for installation without having to
  cut condenser intakes in
• the skirt of the bus, (school bus only)
  providing a more aesthetic OEM
• look to the bus.
• Specifications
• 92,000 BTU/hr capacity
• 2500 cfm
• Amp Draw High 22 amps
• 12 or 24 volts

12
25034 Series Condenser

• Features
• Two 14 diameter high performance fans. High
  performance
• motors with extended brush life. Motor shafts
  are seated to the case
• which is sealed with Viton O-rings to provide
  superior water resistance.
• Highly efficient 6mm coil design provides
  superior refrigerant heat
• rejection and provides superior sub-cooling.
• The unit is fabricated from 16 ga. A-60
  galvanealed steel with the
• individual metal components finished with an
  E-Kote epoxy coating for
• superior durability and resistance to rust.
• Design allows for installation without having to
  cut condenser intakes in
• the skirt of the bus, (school bus only)
  providing a more aesthetic OEM look to
• the bus.
• Specifications
• 62,000 BTU/hr capacity
• 2500 cfm
• Amp Draw High 22 amps
• 12 or 24 volts
• Dimensions 33.5W x 11H x 15D

• Key Components
• Coil 11471719A
• Fan 18000005B

13
25035 Series Condenser
Features One 14 diameter high performance fan.
High performance motor with extended brush
life. Motor shafts are seated to the case
which is sealed with Viton O-rings to provide
superior water resistance. Highly efficient 6mm
coil design provides superior refrigerant heat
rejection and provides superior sub-cooling. The
unit is fabricated from 16 ga. A-60 galvanealed
steel with the individual metal components
finished with an E-Kote epoxy coating for
superior durability and resistance to rust.
Design allows for installation without having to
cut condenser intakes in the skirt of the bus,
(school bus only) providing a more aesthetic OEM
look to the bus. Specifications 35,000
BTU/hr capacity 1275 cfm Amp Draw High 11
amps 12 volt Dimensions 33.5W x 11H x 15D
Weight 52 lbs
Key Components Coil 11471719B
Fan 18000005C
14
25045 Series Rooftop Condenser

• Features
• Low Profile roof top design with overall height
  of 7 inches.
• Two 14 diameter fans to cover a higher
  percentage of the coil, moving
  more
  air than traditional condensers.
• High performance motors with extended brush
  life. Motor shafts are seated to
  the case which is sealed with Viton O-rings to
  provide superior water resistance.
• Counter flow coil circuitry and cross hatch
  tubing maximizes the
• refrigerant heat rejection and provides superior
  sub-cooling.
• The unit is fabricated from 16 ga. A-60
  galvanealed steel with the
• individual metal components finished with an
  E-Kote epoxy coating for
• superior durability and resistance to rust.
• Cover made of high impact molded plastic
• Specifications
• 78,000 BTU/hr capacity
• 2500 cfm
• Amp Draw High 22 amps
• 12 or 24 volts
• Dimensions 40 L x 40.5 W x 7 H
• Weight _at_75 lbs

15
25047 Series Rooftop Condenser

• Features
• Low Profile roof top design with overall height
  of 7 inches.
• Two 14 diameter fans to cover a higher
  percentage of the coil, moving
  more
  air than traditional condensers.
• High performance motors with extended brush
  life. Motor shafts are seated to
  the case which is sealed with Viton O-rings to
  provide superior water resistance.
• Counter flow coil circuitry and cross hatch
  tubing maximizes the
• refrigerant heat rejection and provides superior
  sub-cooling.
• The unit is fabricated from 16 ga. A-60
  galvanealed steel with the
• individual metal components finished with an
  E-Kote epoxy coating for
• superior durability and resistance to rust.
• Cover made of high impact molded plastic
• Specifications
• 100,000 BTU/hr capacity
• 2500 cfm
• Amp Draw High 22 amps
• 12 or 24 volts
• Dimensions 40 L x 40.5 W x 7 H
• Weight _at_75 lbs

16
ACC Tropicool Roof Mount HVAC
System Features Low Roof Profile of only 6.9
inches at centerline of bus Unit width allows the
direct discharge of evaporator air into the coach
without the use of transitions required by
other systems. Six (6) biaxial centrifugal type
blower fans Three (3) axial-flow type condenser
fans High impact fiber glass housing R134a
Refrigerant Available in both single loop or dual
loop refrigeration circuits for single or dual
compressor applications Specifications 96,000
BTU/hr cooling capacity 120,000 BTU/hr heating
capacity Automatic or Manual Control 2400
Evaporator cfm Amp Draw _at_110 amps (12 Volts) 3
speed fans 12 or 24 volts Dimensions 146.5 L x
73.3 W x 6.9 H Weight _at_ 455 lbs
17
ACC Climate Control ATCO Air-O Crimp a/c Hose
System Features Provides a Reliable Leak Free
Crimp One piece clamp assembly with stainless
steel clamps Disposable clamp locator insures
proper fitting alignment Qualified to SAE J2064
Specification Lowest Refrigeration Permeation
Rate Low Moisture Ingression Rate Superior
Abrasion Resistance 3x That of Competition
Specifications ATCO 3800 Barrier Hose ATCO a/c
Series Hybrid/Elastomer Fittings Use with PAG
Oil Available Air Crimp Gun, Model 3801 Available
Manual Crimping Pliers, Model 3802 (flat), or
3803 (90º) Available Cutter, Model 3541 Kwikcut
Hose Cutter