IEEE 1564 Draft 2 - PowerPoint PPT Presentation

1 / 6
About This Presentation
Title:

IEEE 1564 Draft 2

Description:

voltage-sag co-ordination chart. voltage-sag tables. single-index methods ... proposal: co-ordinate with Chapter 6. 4. Alternative indices ? ... – PowerPoint PPT presentation

Number of Views:209
Avg rating:3.0/5.0
Slides: 7
Provided by: mathias1
Category:
Tags: ieee | draft | ordinate

less

Transcript and Presenter's Notes

Title: IEEE 1564 Draft 2


1
IEEE 1564 Draft 2
  • Chapter 1 Overview
  • Chapter 2 References
  • Chapter 3 Definitions
  • Chapter 4 Summary of the procedure
  • Chapter 5 Samples voltages
  • Chapter 6 Event characteristics versus time
  • IEC 61000-4-30
  • three-phase measurements
  • phase-angle jump
  • Chapter 7 Single-event indices
  • IEC 61000-4-30
  • three-phase measurements
  • additional characteristics
  • single-index methods
  • Chapter 8 Site indices
  • aggregation
  • SARFI
  • voltage-sag co-ordination chart
  • voltage-sag tables

2
Chapter 6 issuesevent characteristics
1. How much of IEC 61000-4-30 do we include
? proposal include the whole document as far
as voltage dips are concerned 2. How much do we
add to IEC 61000-4-30 ? proposal define all the
additional characteristics that are mentioned in
the appendix to the IEC document. Describe
phase-angle jump in more detail 3. Additional
methods for three-phase measurements ? proposal
introduce three-phase measurements as a special
case of multi-phase measurements. 4. Overlap
with (scope of) IEEE 1159 ? proposal add to IEEE
1564 what we need even if it falls under the
1159 scope. Remove from 1564 when the
1159-document later includes it.
3
Chapter 7 issuessingle-event indices
1. How much of IEC 61000-4-30 do we include
? proposal include all of IEC 61000-4-30 2.
Pre-event or nominal voltage as a reference
? proposal use nominal voltage as default but
mention pre-event as an option. 3. Additional
indices (i.e. next to remaining voltage and
duration) ? proposal co-ordinate with Chapter
6 4. Alternative indices ? proposal define a
number of single-index methods as an alternative
(guide versus recommended practice)
4
Chapter 8 issuessite indices
1. Do we use SARFI, Unipede table or voltage-sag
contour chart as a basis ? proposal describe all
three methods for the first version of the
document, give advantages and disadvantages plus
methods for translating from one method to
another. 2. Aggregation methods ? proposal
define the aggregation methods very clearly,
leave open the choice of time aggregation
window, etc.
5
Chapter 9 issuesSystem Indices
1. Choice of sites and choice of weighting
factors ? proposal needs further discussion and
possibly further research
6
General issues
1. recommended practice, guide or informative
? proposal IEC 61000-4-30 is recommended
practice some of the other sections as well.
Other parts are guide and some are
only informative. Each chapter selects
normative and informative parts. 2. Definitions
? proposal use IEC 61000-4-30 definitions
plus existing IEEE definitions as a basis.
Each chapter selects terms to be defined. 3.
How wide do we go with this document ? proposal
one main line (IEC SARFI ?) with a number of
additional indices and alternatives.
Write a Comment
User Comments (0)
About PowerShow.com