Reach CityTrekking Owner manual

1
Reach City(Trekking)Owner manual
(Picture shown with optional front/rear carrier /
front/rear fender / kickstand)
2
Reach features

• The riding geometry of full sized city/trekking
  bikes.
• The gear ratio of full sized city/trekking bikes
  - 37102 inch.
• Effective front and rear suspension.
• Rigid small wheels for agile acceleration and
  fast stopping.
• Small front area for better aerodynamics.
• Stiff frame and swing arm for high power
  efficiency.
• Telescopic stem for handlebar height adjustment.
• Super light weight 12.9kg (with optional racks
  and fenders).
• Heavy duty front and rear carriers (25 kg grade),
  designed to take pannier bags. (optional)
• Small package and foldable for convenient
  transportation and storage.

3
Specification

• Frame Built of AL7005 T6 aluminum, rigid front
  triangle and rear swing arm with Rear Shock.
• Front Fork Built of AL7005 T6 aluminum, trailing
  link suspension.
• Seat Post 27.2x240mm alloy.
• Tires/Tubes Kenda K-125 20x1-3/8 (37-451)
  black skin wall 55psi, French valve.
• Rims Alex VP-15 451x15 32 holes, with machined
  sidewall and safety line.
• Hubs Shimano Capreo hubs.
• Crankset Sunrace 56t, 170mm cranks.
• Chain KMC HG40 narrow chains.
• Cassette sprockets Shimano Alivio 11-30t 8 speed.
  
• Rear Derailleur Shimano Alivio direct mount.
• Shifters Microshift thumb-tap shifter with
  optical gear indicator.
• Saddle Velo Vinyl saddle.
• Pedals Wellgo alloy cage.
• Handlebars Zoom 560mm.
• Extension stem Lee chi 70mm extention, 7 degree
  raise.
• Stem Telescopic 250mm, QR lever.
• Brakes Tektro RX3 V brakes.
• Fenders Front and rear (optional).
• Options Carriers, Carrying bag.

4
Assembly ProceduresStep 1 Unpack the box
(1) an 85 assembled Reach, (2) a stem, (3) a
seat/seat post assembly, (4) (5) front and rear
wheels, (6) front and rear hub skewers, (7) a
pair of pedals, (8) Front and rear fenders, (9)
front and rear carriers.
Note fenders and carriers are optional
5
Step 2Insert the seat post into the seat tube,
and close the seat clamp QR lever.
Note Do not raise the seat post higher than the
minimum insertion mark.
6
Step 3Assemble the stem to the gooseneck, and
insert the stem into the head tube, adjust the
handlebar height and alignment, close the QR
lever on top of the stem.
Note Do not raise the seat higher than the
minimum insertion mark.
7
Step 4Stand the bike upside down on the
handlebar and seat. Latch the bottom end of the
rear shock to the rear swing arm, and close the
QR lever.
8
Step 5 Install the front and rear fenders.
9
Step 6Insert the rear hub skewer into the rear
hub from the opposite side of the sprockets,
screw in the nut. Slide the rear hub into the
rear dropouts. Align the rear wheel center.
Adjust the tightness of the skewer and close the
QR lever. Hook the V brake cable.
10
Step 7Slide the front wheel into the front fork
with both ends of hub sitting on the dropouts.
Insert the hub skewer into the front hub. Let
the QR lever on the left side of you. Align the
center of the wheel. Close the QR lever at proper
tightness.
11
Step 8Stand the bike upright and install the
pedals.
Step 9 Adjust the height and alignment of seat
post and handlebar.
Note Do not raise the seat and handlebar over
the minimum insertion mark.
12
Step 10Install the front and rear carriers.
Note Do no put over 25kg of luggage on the
carriers.
13
How to foldLevel 1.Take off the front carrier.
Remove front wheel and seat. Turn the front fork.
Swing the rear swing arm to get the rear wheel
into the front fork. Pull out the handlebar stem.
Stand the bicycle on the rear carrier or put it
into the car trunk.
14
How to foldLevel 2.Remove the fenders and rear
carrier. Take off the rear wheel pack the bike
in a carrying bag for travel.