June 27July2: Remove Shield Wall 3.5 days, Riggers

1

• June 27-July2 Remove Shield Wall (3.5 days,
  Riggers)
• June 27 July 2 Remove Vacuum pipe spool
  pieces.
• July 3 Pull East Poletip
• July 5 Pull West Poletip. Install scaffolding
  EW. (Charlie Steve)
• June 27 July 13 Remove SVT RDOs, extender
  cables, and cabling back to the Racks. Remove
  EEMC Trigger Cables.
• June 27 July 18 Install Rollers and disconnect
  utilities, and roll STAR to AB and connect
  utilities.
• July 20 Aug. 24 EEMC electronics maintenance.
• July 19 27 Install SVT platform, FTPC West
  platform, and disconnect end of cone cables,
  remove FTPCs, and extract cone to platform.
• July 30 Aug. 14 Remove SSD, SVT, all
  utilities on cone, and reassemble cone.
• Aug. 1 15 Install new BEMC PMT comm./controls
  system.
• Aug. 16-21 Reinstall cone, reinstall FTPCs,
  remove rails. Remove installation platform.
• Aug. 22 27 Disconnect utilities.
• Aug. 28 - 29 Roll STAR back into IR.
• Aug. 30 Sept. 10 Install Utilities.

Draft STAR Shutdown Schedule/Plan
July 2007
August 2007
Summer Sunday
2
September 2007

• Sept. 6 18 Beam Pipe Bakeout
• Sept. 11th STAR in IR with utilities connected.
• Sept. 11 Oct. 12 TPC Electronics maintenance.
• October 1st TOF Trays arrive at BNL for
  installation.
• Oct. 15 18 SGIS Certification.
• Oct. 17th West Poletip installed.
• Oct. 24 East Poletip installed.
• Oct. 25 30 Magnet testing.
• Nov. 1st Collider Cooldown Begins.
• Nov. 1 2 Install BBCs.
• Nov. 7th Lose access to IR for Collider
  Commissioning.
• Still Open
• When/where best to install TOF trays? Best
  locations 2, 4, 7, 1000.
• Details/plan for the TOF water system?

October 2007
Collider Cooldown Begins