tyco MX TECHNOLOGY

1
tyco MX TECHNOLOGY

• MX VIRTUAL Multi-Sensor Detectors

2
MX VIRTUAL Multi-Sensor Detectors

• 25 Virtual detectors from 2 physical detectors
• Suitable for all fire types
• Adapts to changes in a buildings use
• Reduces installation maintenance costs

3
tyco MX TECHNOLOGY
MX VIRTUAL Multi-Sensor Detectors
800PH Series Photo Heat 800CH Series CO
Heat Plus 800H Series Heat only 800I Series
Ionisation
4
tyco MX TECHNOLOGY
MX VIRTUAL
Single Detector Modes(eg. HPO, Optical, Fixed
heat, Compensated CO) Dual Detector Modes(eg.
HPO and Fixed Heat Detection) Day/Night Mode
switching (eg. ROR in the day, HPO at night)
5
tyco MX TECHNOLOGY
MX VIRTUAL Detector Key Features

• Low cost
• Environment friendly
• Self verification for remote maintenance
• Use existing low profile bases
• Optional isolator withevery detector

6
tyco MX TECHNOLOGY
MX VIRTUAL Detector Key Features

• Stores service information
• Programmable 360º LED
• Duct probe options
• Temperature indication
• CO Smoke level indication

7
tyco MX TECHNOLOGY
MX VIRTUAL Detector Key Features

• Easy to install (no address key)
• Sounder (801SB) base
• Relay (801RB) base
• Isolator (801IB) base
• Detector functional base separately
  identifiable, but only 1 address

8
801PH - LPCB Approvals
Heat enhanced optical (HPO) FASTLOGIC 3
Sensitivities (Default) Standard 2
Sensitivities
Optical FASTLOGIC 3 Sensitivities Standard
2 Sensitivities
Combinations Optical A2S 3
Sensitivities Enhanced optical A2S 3
Sensitivities
Heat A1R A2S
9
801CH - LPCB Approvals
Carbon Monoxide 2 Sensitivities
Heat enhanced CO (CCO) 2 Sensitivities
Combinations CCO A1R 1 Sensitivity (Default)
Heat A1R 1 Sensitivity A2S 1 Sensitivity
10
801H - LPCB

• Elements Operating Modes Sensitivities
• Heat A1R 1 A2S 1 CR 1
• 801I - LPCB
• Elements Operating Modes Sensitivities
• Ionisation Threshold level 3

11
OTHER DETECTORS

• Flame detectors
• S271F
• Beam detectors
• ASD detectors
• Linear Heat detectors
• LD40 (Cable)
• MXF100 Minerva Fireline (FibreOptic)
• Intrinsically Safe
• Ph1 M300Ex
• Ph2 800Ex

12
tyco MX TECHNOLOGY
MX Loop Ancillaries

• MX Loop Ancillaries are designed for flexible
  wiring configurations.
• Faster installation
• Faster commissioning
• Meet customer requirements
• Circuit styles are described using the NFPA 72
  descriptions for initiating circuits and
  notification circuits.

13
Core Ancillaries

• MIM800 - Mini-Input Monitored
• CIM800 - Contact Input Module
• DIM800 - Detector Input Monitor
• SNM800 - Sounder/Notification Module
• RIM800 - Relay Interface Module
• APM800 - Power Supply Monitor
• Call Points / Pull Stations
• Audio Amplifier - phase 2

14
Non-Addressable Devices

• SB520 - Sounder/Notification Booster
• Used in conjunction with SNM800
• Increases DC Sounder Capacity to 10 Amps
• As used on Minerva / TFX
• HVR800 - High Voltage, Self powered, Interposing,
  Relay
• 120/240 VAC, _at_ 10A, 1 Form C Contact
• No Supervision
• Compatible with standard tyco MX relay Modules

15
General Features

• 250 ?A Average Standby Current Draw
• Device Address Programming Concept
• The ancillary can be programmed after the device
  has been fastened to the electrical junction box
• The ancillary can be programmed after the device
  has been wired into the loop.
• Connect a three pin cable from the device
  programmer to a header on the ancillary.

16
tyco MX TECHNOLOGY
MX Loop Ancillaries and Detectors

• Designed for flexible wiring configurations.
• Faster installation
• Faster commissioning
• Meet customer requirements
• Loop powered modules.
• Easy and flexible programming.
• Easily maintained and tested.