4Hybrid Thermal Test System Status

1
4-Hybrid Thermal Test System Status
20 May Sam Burke UCSB HEP Group
2
Progress

• Claim filed with Fed-Exp for 480 to cover cost
  of Coolie Box rebuild
• Work on Temp/Humidity Probes
• 6ft Rack acquired for 18 months
• ARC Power Supplies in rack
• Thermoelectric Element ordered (400)
• Reverse Engineering Coolie Relay board

3
Progress

• Testing of damaged Coolie Box
• power-up looks normal
• no RS232 response on power up
• High Current Connectors Here

4
Equipment Rack

• NIM Crate
• ARC P/S
• 
  ARC Controllers
• 
  Collie Controller
• ARC P/S
• Peltier P/S
• 
  Relay Interface
• N2/Water Manafold

5
Current Needs

• NIM Crate (pulse gen, nim-ttl-nim, or)
• Water manafold design (1L/m)
• closed loop with chilled water (400w)
• Nitrogen manifold design (.02L/m 0.2L/m)
• dry air or Nitrogen? If N then bottles or gen?

6
Current Needs

• Dedicated PC setup with bar code reader, serial
  port, 2 PCI slots for Aachen modules
• New Coolie Box back panel
• damaged panel
• new connectors
• Plumbing (airwater) design
• ASC Rep contacted to visit UCSB re valves

7
Future Plans

• Complete Tests on Coolie Box and order a 2nd if
  required
• Install new power transformer if unit is ok
• Communicate with Digital Temperature Sensors
• Design Temp Sensor PC Card
• Install LabView on PC and test CERN code
• Design Solenoid valve Interface