XT55 Evaluation Kit

1
XT55 Evaluation Kit
2
Table of content

• Technical data
• The main board
• The adapter board
• Package content
• How to flash SW packages
• SiRFFlash PC-software
• Use with standard SW package
• Use with AVL or TCP/IP SW package

3
Technical data

• 3 x RS232/485 serial interfaces
• 2 x RJ45 audio I/O
• GSM/GPS module depending interface
• 1 x 4Pin battery connector
• 1 x SIM-Card holder
• Operating temperature -10C to 40C
• Power supply 10.8V to 18V DC
• 1 x Main-Board and 1x Adapter-Board

4
The main board
5
The adapter board
6
Package content

• 1 x universal evaluation board
• 1 x XT55 adapter board
• 1 x power supply adapter
• 1 x GPS/GSM combination antenna
• 1 x antenna-adapter Hirose U.FL-R-SMT / SMB
• 1 x antenna-adapter Hirose U.FL-R-SMT / FME
• 1 x Headset
• CD with documentation and evaluation software

7
How to flash SW packages

• put the module on adapter board
• connect the 3 RS232 DB9 connectors to a computer
• connect the power supply
• set switch 7 of switch field 2 to on
• press button 1 and 3 to reset module
• open SiRFFlash on the connected computer
• setup the used serial port
• enable erase whole flash
• chose SW package to flash
• click OK
• set switch 7 of switch field 2 to off
• press button 1 and 3 to reset module

8
SiRFFlash PC-software
9
Use with standard SW package

• put the module on adapter board
• connect the 3 RS232 DB9 connectors to a computer
• connect the antenna to to XT55 antenna connectors
• set the two position switch (AVL/TCP standard)
  to standard
• connect the power supply
• press button 1 and 3 to reset module

10
Use with AVL or TCP/IP SW package

• put the module on adapter board
• connect the 3 RS232 DB9 connectors to a computer
• connect the antenna to to XT55 antenna connectors
• set the two position switch (AVL/TCP standard)
  to AVL/TCP
• connect the power supply
• press button 1 and 3 to reset module