Photoelectric Detector - PowerPoint PPT Presentation

1 / 13
About This Presentation
Title:

Photoelectric Detector

Description:

The laser shoots a beam to ... for the original beam to be broken and not set off the alarm ... is broken, the switch is cut off and power is routed to the ... – PowerPoint PPT presentation

Number of Views:201
Avg rating:3.0/5.0
Slides: 14
Provided by: sgr75
Category:

less

Transcript and Presenter's Notes

Title: Photoelectric Detector


1
Photoelectric Detector
  • ECE 4894
  • Section RPY
  • Date July 26, 2004
  • By Scott Groves

2
Photoelectric Detectors
  • Commonly used in todays home alarms systems
  • It implements a laser and some type of
    photo-sensor

3
Photoelectric Detector
  • The laser shoots a beam to the photo-sensor
  • If beam is disrupted, the sensor sends out to a
    signal

4
Experiments
  • I chose the LTS1 for my project
  • Several experiments were performed
  • First surrounding light was greatly increased.

5
Experiments contd
  • Next an extra laser was used to see if the sensor
    could be manipulated

6
Results
  • Increasing the light had no effect on the device
  • The additional laser aimed at the device did make
    it possible for the original beam to be broken
    and not set off the alarm

7
Photo-sensor
  • There are several types of photo-sensors
  • Phototransistor
  • NPN Transistor
  • Collector, Base, Emitter

8
Phototransistor
  • The phototransistor acts like a switch
  • Light (photons) strikes the Base tuning it on.
  • When the beam is broken, the switch is cut off
    and power is routed to the alerting circuitry and
    trigger relay

9
Characteristics
  • Spectral Response 630-670 nm
  • Linearity 3 to 4 decades of illumination
  • Sensitivity area of the base and the dc
    current gain
  • Dark current current that can flow from the
    collector to the emitter and the transistor still
    be off 10nA to 100nA

10
Modifications
  • Make an enclosure that completely surrounds the
    photo-sensor so that a laser has to be at a
    precise angle to hit the photo-sensor. That way
    no other laser sources can be used.

11
Modifications contd
  • Make mirrors standard so that the laser beam can
    be projected all the way up a doorway so that
    someone cannot just step over the laser beam.

12
Any Questions?
13
References
  • http//www.physlink.com/Education/AskExperts/ae430
    .cfm (Visited 2004, July 20)
  • http//www.tpub.com/neets/book7/26g.htm (Visited
    2004, July 22)
  • http//www.ramseyelectronics.com/downloads/manuals
    /LTS1.pdf (Visited 2004, July 17)
  • http//optoelectronics.perkinelmer.com/catalog/Pro
    duct.aspx?ProductIDVTT3323LA (Visited 2004,
    July 25)
Write a Comment
User Comments (0)
About PowerShow.com