BE

1
SPLITTER
HES
BZ
HORIZONTAL CORRECTORS
ADDITIONAL SHIELDING
BE
DIAGNOSTIC GIRDER
HORIZONTAL VERTICAL CORRECTORS
BEAM
PHOTON DUMP
HKS
PHOTON VIEWER
SUPERHARP GIRDER
HKS / HES EXP 2008 BEAM TRANSPORT ELEMENTS
2
HKS / HES EXP 2008 ENGINEERING AND PHYSICS EFFORTS
1) Physics Rotate SOS
6) Support Structure for Diagnostic. Girder
9) Beam Transport to 24 Diameter Dump Tube
Support
2) Physics Remove Magnet
3) Physics Remove Rails
3) Support Structures for Beam Tube
1) BE Magnet Re-Oriented Support Structure
2) Remove 8 Diameter Pipe
8) Photon Dump Self-Contained Cooling System
7) Beam Tube to Photon Dump Supports
BEAM
5) Support Structure for BZ Magnet
4) Support Structure for Superharp Girder
3
(No Transcript)
4
HKS/HES EXPERIMENT ROUGH SCHEDULE
5
ENGINEERING Information needed for the 7/1/08
HKS/HES Installation

• DIAMAD of all elements (including Splitter
  entrance exit provided to the Alignment Group
  for processing.
• Beam envelop throughout transport (to Dump) to
  design the transport lines.
• Photon Dump Specifications to make a have vs
  design decision for the dump transport line.
• Radiation Specifications to develop the Shielding
  design.
• Radiation Specifications to design Post
  Splitter-to-Dump transport line.
• Horizontal Vertical Corrector field strengths
  to make a have vs design decision.

• Photon Viewer Specifications to determine screen
  configuration.
• Entrance Exit Flange configurations of the
  SPLITTER for e-beam photon beam transport
  installation.
• Final .dxf and/or .dwg of the HKS/HES/SPLITTER
  assembly from Japan.