General

1
(No Transcript)
2
General
The FIRST Network System suitable for small and
medium applications.
2
EXIT
3
Features Benefits
3
EXIT
4
Components Central Point
Two ways to control the network
4
EXIT
5
MaxiNet Software Main Screen
5
EXIT
6
Friendly Software
6
EXIT
7
Software Weekly Program
7
EXIT
8
Software Temperature Graph
8
EXIT
9
Components for Software

• CD install
• Adaptor RS232-RS485
• Cable for Com connection
• Transformer for Adaptor
• all components are supplied with the software

Easy to install and connect Plug Play
9
EXIT
10
MCU - Master Control Unit

• Optional unit for networks until 60 units
• Perfect solution for FLOOR applications
• to view locally the units in the sub network
• easy view and make changes
• - Mode
• - Fan speeds
• - Set temperature
• - Set temperature limit
• - On/Off
• Broadcast for all sub network
• emergency weekly program activate
• automatically when the software is not
  working
• The most simple router to use in the market

10
EXIT
11
Maxi-Router
Easy to select unit in network , and change
parameters
11
EXIT
12
Network Thermostats
Different choices for Thermostats
12
EXIT
13
Flush Wall Mount Thermostats
or
13
EXIT
14
Wall Mount Thermostat 24V AC
14
EXIT
15
Flush Mount Thermostat 220V AC
15
EXIT
16
Controller PS1800-AC-Super

• The best commercial application thermostat in
  the market
• All-In-OneTM configuration for A/C applications
  (jumper selected)
• Heat pump or not , 3 speeds 1 speed
• Power supply with communication built-in install
  at the unit.
• Wall or Flush mount thermostats complete
  optional.
• Preprogram from factory (no field program
  require)
• View temperature sensors in Software
  Indoor/Outdoor coil

16
EXIT
17
ControllerPS1700-Fan Coil-Super

• The best Fan Coil controller with communication
  in the market
• All-In-OneTM configuration for Fan coil
  applications (jumper selected)
• 4-pipe, 2-pipe No Valves and change over
  sensor
• Power supply with communication built-in install
  at the unit.
• Wall or Flush mount thermostats complete
  optional.
• Preprogram from factory (no field program
  require)
• View temperature sensors in Software
• Indoor coil and change over sensor

17
EXIT
18
Thermostats for Controllers
18
EXIT
19
General Purpose Card PS1600
Control other devices through the software, Such
as Extractors, Fan, Fresh Air Dampers, Lights,
Air compressors, Etc .
When ordering PS1600, the PS201P is included

• 8 Outputs Dry Contact Voltage Free
  Controlled thru the software
• Each one can be weekly programmed

19
EXIT
20
Output Card - Control
20
EXIT
21
Schematic Installation Layout 1

• Network with Master Unit (programmable)
• Until 60 units

21
EXIT
22
Schematic Installation Layout 2

• Network with Maxi-Router and Software
• Control the network from software or from the
  maxi-router
• Until 60 units

MaxiNet Software
Adaptor RS232/RS485
RS232
Network RS485
22
EXIT
23
Schematic Installation Layout 3

• Network with Software
• Until 60 units

23
EXIT
24
Schematic Installation Layout 4

• Network with Software and routers for more than
  60 units

Until 60 units
Until 60 units
MaxiNet Software
Adaptor RS232/RS485
RS232
Network RS485
24
EXIT
25
Summary
This is the most
Way to have Thermostats Networks
25
EXIT
26
Summary
This is the most
Way to have Thermostats Networks
27
Further Information
Install Maxinet Demo
Maxinet Software Data Sheet
Master Control Unit Data Sheet
General Explain Networking
ETN-C Data Sheet
Layouts Connections - General
FMH-C Data Sheet
Layouts Connections - Details
PS-1800-AC-Super Data Sheet
Maxinet Operating Manual
PS-1700-FC-Super Data Sheet
PS-1600 Data Sheet
Company General Introduction
EXIT