ADR Test Clamp Design, Development, and Testing

1
ADR Test Clamp Design, Development, and
Testing
Rich Northrop University of Chicago
8.8.07
9.18.07
Revised

9.26.07 Revised

10.5.07
Revised
Mark Zaskowski
2.22.08 Revised
2
ADR Project PMT Test Frame Design
5.30.07 RN
First Design
Ball Spring 28 lbs. ea.
G-10 Clamp
Readout PCB
B tech TP-1 connector Plane
Buryl Planacon PMT 85022 800 Rev B
Read out cable ( 1 of 4 )
Assembly Mount holes
Ground strap ( 1 OF 8 )
3
(No Transcript)
4
G-10/FR-4 Face support bar
5
G-10/FR-4 Support sides
Center Bridge
5 point compression ball spring mount points
6
(No Transcript)
7
(No Transcript)
8
(No Transcript)
9
(No Transcript)
10
(No Transcript)
11
ADR MCP Test Assembly sent to Argonne for
testing
Sept. 26, 2007 RN
12
(No Transcript)
13
2.21.08
14
2.21.08
15
ADR Concept Sketch
7.24.07 RN

16
ADR Concept Sketch
8.8.07 RN