No More Drpped Ears

1
No More Drpped Ears!
2
Contact CementQ-TipsScissorsSmall Shaver
(optional)Tweezers (optional)
3
Remove hair from ear canal
4
Clean out with Q-tip
5
Shave the ear inside and outside. Shave only the
tips, not the whole ear.
6
Trim the edges of the ear.
7
The ear should look like this.
8
Measure the Q-tip from the top of the ear to the
base of the ear. Cut any excess.
9
Put contact cement on Q-tip
10
Put contact cement on the inside of the ear.
11
Put contact cement all the way to this tip and
let dry 4 minutes.
12
After 4 minutes glue the Q-tip into the ear with
the contact cement. Make sure the Q-tip is in the
ear until the base. DO NOT go too deep! Maintain
pressure for 2 minutes until the contact cement
is dry.
13
Once you are done make sure to open the base of
the ear to allow air flow. Make sure the top
stays glued. Leave the Q-tip on until it falls
off by itself. Repeat if necessary.
14
This is what your puppy should look like when you
are done ?