cimatron E

1
cimatron E ????????
3. Define a new TP (MACSYS Clearance plane)
1. Load geometry
2. Define Cutters
4. Define the Part
5. Define the Stock
6. Apply Procedures
7. Validate the process
8. Post Process to Machine
9.
2
The NC Environment
3
Tools that HELP you work
4
NC Guide
Leads You Through the Work Process
From loading a model (built in CimatronE or
imported part file of another format such as sat,
igs, vda) through the creation of NC procedures
(Milling technologies) to outputting the the
G-codes to machine the part.
5
The Work Process
Follow the NC Guide Or Choose Your Own Way
6
Load a Cimatron E Model
Or Create a New One with the CAD tools
7
Cutters

• Create new
• From Library
• From another File

8
TP Folder

• Create New
• Use a predefined Template

2.5 Axis 3 Axis 4 Axis 5 Axis
9
Stock Part

• For
• Optimizer
• SimulateVerify
• RemainingStock
• With Preview

Part is a 3X procedure used to represent the
final-product designed part. The part procedure
is used by the Verifier, for comparing actual
milling results to the desired product.
Stock is a 3X procedure used to represent the
stock material from which the final part will be
produced. Remaining stock is calculated after
each procedure, so that cutter motions can be
optimized upon the current stock status. The
remaining stock can be displayed at any time
after any executed procedure
10
Procedure

• Create New
• Create From Template
• New Guide ?

11
Procedure Guide
YOU CHOOSE THE ORDER
12
Machining Method

• Logical Interaction
• Full Capabilities
• Quick and Easy

Main Selection
Sub Selection
Milling 2D\3D
13
Rough Milling
14
Semi finish Finish Milling
OPTIMIZE Horizontal or Vertical
15
Contour Milling
16
Cleanup Milling
Identify and clean unmachined areas that remain
after previous machining operations
17
Pencil Milling
Machine one pass along all internal sharp corners
in the part, as well as areas with radius of
curvature smaller than the cutter radius. The
results of this procedure are clean and smooth
internal corners.
18
Drill Milling
Create standard cycles for drilling operations
19
Flow line Milling
Part Surface UV 5X
20
Geometry

• Pick Once
• Defaulted
• Manual/Criteria
• Before/After

21
Parameters

• Customize
• Collapsible
• Relations

22
Advanced User Mode
All Parameters on View
23
NCAssistant

• Visual Explanation of Options
• Great Help for both the Beginner and Advanced User

24
After Procedure Creation

• More Active Icons

25
Flexible Post Processing
You Choose

• What

• Where

• How

26
Full Editing
ChangeANYTHING!
27
Manual Editing
28
Nc Externals
29
Full Linking to Model (1 way)