QUICK GUIDE MANUAL

1
QUICK GUIDE MANUAL GV-DVR1042
2
1. System Organization
1. System Organization
2. Specification
3
2. Installation
4
3. Description
5
4. Operation(Server)
4-1. DVR Operation
? Turn on the DVR
1. Press Power Button to Start the System 2.
After Checking Hard Disk, Need input Password to
Operation 3. Initial Screen View Mode is 4CH
Display Mode. 4. Initial Password is 1234.
? Go to Menu
1. Press SETUP Button 2. Ask Password 3. Input
Password Using by Channel Select Button.
(Initial Password is 1234) 4. After Input
Password, Press Enter to See the Menu
? Go to System setup
1. Choose the system setup 2. All installation
function can be controlled at this menu.
6
4. Operation(Server)
? Go to Record Menu
Schedule Mode Choose the DAILY or WEEKLY.
Pre-Event Recording Time Setup Pre-Event
recording Time. 1

(15 sec) Post-Event Recording Time Setup
Post-Event recording Time. 1

(1180 sec)
Continuous/Motion Record Schedule 1.
Parameter - Size, FPS, quality, audio
control
On yellow frame status, select area to setup by
direction key.
Setup size, FPS, quality, audio of each
channel. Setup each day on weekly mode.
Move to lower side, press Enter button twice.
7
2-2. Schedule - Setup
continuous/motion record schedule
MOTION
Selection menu of NONE/TIMER/MOTION appears.
Among them, select one for setup.
Setup result is displayed as above. - NONE
Not record - TIMER Continuous record(blue) -
MOTION Motion record(black dot) Setup each
day on weekly mode.
Alarm recording setup is almost same with how
to continuous recording.
? Go to Archiving
1. All recording function can be controlled at
this menu. If CD-RW and USB stick are connected,
they will be detected automatically.
8
4. Operation(Client)
4-2 Remote S/W Operation
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
? Main Screen Image Showing Present
Surveillance Camera Image ? Camera Selection
Button Indicate Connected Camera No. Select
Image to Click Camera No. ? Hidden/Exit Hide
DVR Client Window or Exit Program ? Time Output
Showing Present Time Date ? DVR setup ? Local
setup Setup to connect the DVR ? Search Search
the backup data. ? DVR Selection Select I/D to
Connect Server ? Connect Disconnect Connect and
Disconnect DVR ? Screen Division Selection
Change Screen Division Mode ? PTZ Control Button
Control Camera PTZ Focus ? Event viewer
Showing Present Event in Server Find Image ?
PTZ Control Button Control Camera PTZ
Focus ? Audio Button and Alarm Control Two Way
Audio Mute and Alarm On/Off ? Connection
Status Showing the connected DVR. ? Quit Exit
DVR Client
9
4. Operation(Client)
4-3. How to connect
? Group list ? DVR Information ? Camera Position
Set camera position ? Option Check ? Add,
modify, delete group
1. Click the Setup icon. 2. Click the mouse right
button from Site icon. Then
see the add group icon. 3. Click the add
group icon and see the below display. 4.
Input the name and see the below display.
Input the name, IP, Port and etc. Press the add
button. Then it will be added at the list.
10
4. Operation(Client)
Choose the group from And click the
Click the Close button and see the display
mode.
11
4. Operation(Client)
4-4. How to Setup
Click the
After select the DVR, click the Select
button. After input the password and click
ok, see below display. All setup function can
be controlled.