Overview of the IEC Transformer Standards - PowerPoint PPT Presentation

1 / 24
About This Presentation
Title:

Overview of the IEC Transformer Standards

Description:

Transformers Committee. IEC Technical Committees ... Power transformers - Part 4: Guide to the lightning impulse and switching ... – PowerPoint PPT presentation

Number of Views:1417
Avg rating:3.0/5.0
Slides: 25
Provided by: IEE44
Category:

less

Transcript and Presenter's Notes

Title: Overview of the IEC Transformer Standards


1
Overview of the IEC Transformer Standards
  • 6 October 2008
  • H. Jin Sim
  • TF Chairman, IEEE/IEC Cross Reference
  • Transformers Committee

2
IEC Technical CommitteesDeveloping and
maintaining Transformer documents
  • TC 10 Fluids for electrotechnical applications
  • TC14 Power transformers
  • TC 36 Insulators
  • SC 36A Insulated bushings
  • SC 36B Insulators for overhead lines
  • SC 36C Insulators for substations
  • TC 112 Evaluation and qualification of electrical
    insulating materials and systems

3
IEC TC 10 List of Documents
4
IEC TC 10 List of Documents
5
IEC TC 10 List of Documents
6
IEC TC 10 List of Documents
7
IEC TC 14 List of Documents
IEC 60076-1 (2000-04) Ed. 2.1 Power transformers
- Part 1 General
IEC 60076-5 (2006-07)  Power transformers - Part
5 Ability to withstand short circuit
IEC 60076-2 (1993-04)  Power transformers - Part
2 Temperature rise
IEC 60076-7 (2005-12)  Power transformers - Part
7 Loading guide for oil-immersed power
transformers
IEC 60076-3 (2000-03)  Power transformers - Part
3 Insulation levels, dielectric tests and
external clearances in air
IEC 60076-4 (2002-06)  Power transformers - Part
4 Guide to the lightning impulse and switching
impulse testing - Power transformers and reactors
8
IEC TC 14 List of DocumentsCurrently in Revision
or Development Process
Power transformers - Part 1 General Power
transformers - Part 2 Temperature
rise Reactors Maintenance cycle report to IEC
60905 Ed.1 Power transformers - Part 12 Loading
guide for dry-type power transformers Power
transformers - Part 14 Design and application of
liquid-immersed power transformers using
high-temperature insulation materials Power
transformers - Part 15 Gas-filled-type power
transformers Power transformers - Part 16
Transformers for wind turbines applications
9
IEC TC 36 List of Documents
IEC 61109 (1992-03)  Composite insulators for
a.c. overhead lines with a nominal voltage
greater than 1000 V - Definitions, test methods
and acceptance criteria
IEC 62217 (2005-10)  Polymeric insulators for
indoor and outdoor use with a nominal voltage 1
000 V - General definitions, test methods and
acceptance criteria
IEC 60137 (2003-08)  Insulated bushings for
alternating voltages above 1000 V
10
IEC TC 36 List of Documents
IEC 62199 (2004-05) Bushings for d.c. application
11
IEC TC 36 List of Documents
12
IEC TC 36 List of Documents
13
IEC TC 36 List of Documents
IEC 60137 Ed. 6.0 Insulated bushings for
alternating voltages above 1 000 V
14
IEC TC 36 List of Documents
IEC 61109 Ed. 2.0 Composite suspension and
tension insulators for a.c. overhead lines with a
nominal voltage greater than 1000 V -
Definitions, test methods and acceptance criteria
15
IEC TC 112 List of Documents
IEC 60085 (2004-06)  Electrical insulation -
Thermal classification
16
IEC TC 112 List of Documents
IEC 60505 (2004-10)  Evaluation and qualification
of electrical insulation systems
17
IEC TC 112 List of Documents
18
IEC TC 112 List of Documents
19
IEC TC 112 List of Documents
IEC/TS 62332-1 (2005-09)  Electrical insulation
systems (EIS) - Thermal evaluation of combined
liquid and solid components - Part 1 General
requirements
20
IEC TC 112 List of Documents
21
Comparison of IEC and IEEE Documents
There are several old comparisons available,
such as the example below
22
Comparison of IEC and IEEE Documents
IEEE has a TF to update these comparisons
23
Summary
  • Know the differences between standards
  • Specify main requirements clearly in your
    company specifications
  • Participate in development efforts to harmonize
  • Support the efforts by IEEE and IEC to work
    together
  • Joint development agreement
  • Consider holding meetings to maximize
    international participation where appropriate
  • Consider a Cat D liaison to formalize
    communication

24
Questions?
Write a Comment
User Comments (0)
About PowerShow.com