Title: Engineering and technical retrieval for multifunction building in project Liktendarzs
1Engineering and technical retrieval for
multifunction building in project Liktendarzs
- Authors Davis Eniks, Gints Apinis, Marcis
Vidass, Toms Matuzevics
Baltic BEST Engineering Competition, April 18-20
2009, Riga
2HEATING AND COOLING
ENERGY
Thesis The best way of saving energy is not
using it
3Construction
Heat permeability coefficient (U) is 0.14 W/m2K,
which well exceeds the required coefficient (by
Latvia building code) for public buildings and
also exceeds the 0,15 W/m2K coefficient for
passive buildings. The upper layer is made of
local limestone (southern wall) and local timber
(all walls and roof) All layers of the heat
insulating wall must be installed with maximum
caution, as creation of unwanted thermal or hydro
bridges may occur.
4Glazing
- Triple glazing
- Triple-glazed windows utilize three panes of
glass to dramatically reduce condensation and
thermal transfer while insulating as much as 60
better than double-glazed windows. - 2) Inert gas (Argon)
- Argon gas is used in the air paces between the
glass panels. This inert, environmentally safe
gas significantly reduces the conduction of heat. - 3) UV filter
- It protects furnishings by screening out most of
the damaging ultraviolet light rays. This reduces
fading and related damage. - 4) Low emissivity coating
- In summer, when the sun is high, much of the
long wave exterior heat radiated by such things
as path, is reflected off the exterior. - In winter, when the sun is low in the sky, it
allows the suns energy through the window.
5This chart measures the resistance of heat
transfer through the glass. The higher the
number, the better the window insulates.
This chart measures the ratio of solar heat gain
through a window system compared to an
unobstructed opening.
We offer to use Heat-Smart plus 3 glazing
systems. It is triple glazed, with two layers of
LowE coatings and two 12mm air spaces filled with
argon gas.
Heat permeability coefficient (U) 0.14 W/m2K
that meets the passive house standart.
This chart measures the percentage of ultraviolet
radiated wavelengths allowed to be transmitted
through the glazing.
6Interior materials
- Division walls
- Locally produced plywood framing with glass
filling - Locally produced wooden beam walls
- Flooring
- Locally produced wooden flooring or parquet where
possible - Locally produced ceramic floor tiles
- For masonry walls gypsium based render (outer
layer) -
7Heating and cooling
- The main heat and frost source air heat pump
- Main advantage Heating the building in winter
and cooling ir in summer - Recuperation system for heat energy recovery from
the heated/cooled air. - High energy efficiency the produced energy is
up to 5 times the worth of investment - The system supplies fresh filtred air to every
room whilst exhausting stale air and odours to
the outside
8Energy
- Wind energy
- Solar energy
- Other energy resources Harvesting water energy,
pavement absorbtion energy - Map of wind intensity in Latvia Map of solar
intensity in Latvia
9(No Transcript)
10 11Thank you for your attention!
Questions, comments?