Caliset KS Knapsack Sprayer Calibration

1
Caliset - KSKnapsack Sprayer Calibration
2
Before calibration
Use water only when calibrating the sprayer
3
Calibration Materials
4
Step 1 Determine a crop area

• A) Determine and mark a representative crop
  area inside a larger field of
• the crop to treat.

5
Fill in a known amount

• 2) Empty the tank, pump and hose.
• 3) Fill in a precisely measured amount of water.
  
• Example Filled in 15 l (e.g. to the
  Full mark)

6
Spray the determined crop area

• 4) Spray the marked crop area as usual.

5) Do not spray outside the marked crop
area.
7
Check the used amount

• 6) Measure the
• remaining amount
• of water by empting
• the entire sprayer
• 7) Calculate the used
• amount.
• Example

8
Calculate the spray volume per hectare

• 8) Calculate the spray volume per hectare

9
Calculate the product-dose

• Example
• 9) Product-dose per ha as recommended Product
  XY
• 0.25 l/ha 250 ml/ha
• 10) Spray volume as measured 800 l/ha
• 11) Spray-mixture per tank filling 15 l

Product-dose 0.25 l/ha
Tank-mixture 15 l
X

4.6 ml/ tank
Factor 1000
X
Spray Volume 800 l/ha
12) Measure the amounts of product as precise as
possible e.g. with a syringe for liquids