ResponseCard XR Creating Tests and Homework

1
ResponseCard XRCreating Tests and Homework

2
Navigating the Menu

• Press the MENU button to bring up the Main Menu.

Press the Down Arrow twice to select the
Test/Homework Menu.
3
Navigating the Menu
Press Enter to select the Test/Homework Menu.
4
Test/Homework Mode

• Test/Homework Mode is momentarily displayed.

5
Create a New Session

• Press 1 to create a New Test/Homework Session.

6
Enter Control Number
Use the Left and Right Arrows and the SEL button
to enter a control number of your choice.

• A control number is an identifier just for you
  so that you can identify each homework assignment
  stored on the ResponseCard.

NOTE A control number that starts with 1 cannot
be edited later.
7
Enter Control Number

• A control number can be any combination of one
  to four letters or numbers.

Here, we have identified this session as our MATH
homework.
8
Accept Control Number

• Once you are satisfied with the Control Number,
  press the Enter key.

9
Accept Control Number

• The ResponseCard will prompt you to verify you
  have entered the correct Control Code.

Press YES to accept this code, NO to edit it.
10
Answer the Questions

• The first question is displayed (001).Answers
  can be in any format Multiple
  Choice,Numeric,Fill-in-the-Blank.

Use the Ans Mode button to toggle between the
different answer modes.
11
Multiple Choice

• The default Ans Mode is multiple choice or
  single number answers.

The question is answered by pressing any one of
the numbered keys.
This is indicated by the 1 in the top bar of the
display.
Pressing Ans Mode again will toggle to the next
mode.
12
Numeric Mode

• The next Ans Mode is numeric entry. This is
  indicated by the 123 in the top bar of the
  display.

You can now enter numbers, decimals and /-
however, you must press Enter when you are done
to complete your answer.
Pressing Ans Mode again will toggle to the next
mode.
13
Alpha-Numeric Mode

• The next Ans Mode is alpha-numeric entry. This
  is indicated by the 123 ABC in the top bar of the
  display.

You can enter letters and numbers as you did when
setting up your ResponseCard. You must press
Enter when you are done to complete your answer.
Pressing Ans Mode again will toggle to the next
mode.
14
Single Letter Mode

• The final Ans Mode is single letter entry. This
  is indicated by the A in the top bar of the
  display.

The question is answered by pressing one of the
keys labeled A through J. You do not need to
press Enter!
Pressing Ans Mode again will toggle to the next
mode.
15
Answering Single Letter Mode

• If the answer to a multiple choice question is
  C, then make sure you are in single letter mode
  and press the C key.

16
Answering Single Letter Mode

• You will see the answer, followed by the
  indication that the ResponseCard is storing the
  data.

(The single entry mode for numbers is the same.)
17
Answering Single Letter Mode

• Once the answer is stored, you are automatically
  advanced to the next question.

18
Answering Numeric

• If the next question requires a numeric answer,
  toggle to numeric answer mode.

19
Answering Numeric

• If the answer to the question is 1.34, then
  press those keys.

20
Answering Numeric

• Next, you must press the Enter key to accept
  this answer.

You will momentarily see the Storing message
and the ResponseCard will advance to the next
question.
(The alpha-numeric mode is the same.)
21
Finishing the Test

• When you are done with the entire assignment,
  press the MENU button, also labeled Start/End
  Test.

Then press YES.
22
Save or Send?

• After finishing the test, you can

2. Save the data for later (if youre doing
homework and not in class).
1. Immediately upload the test to the receiver
if instructed to do so.
3. Forget the whole thing and delete all of the
work you just did!
23
Saved Test

• If you have chosen to save the test, you will
  receive the message that the Test was saved
  successfully.