ballbuster presentation

1
(No Transcript)
2
(No Transcript)
3
WHAT IS BIT BALLING
the fouling of a rotary drilling bit in sticky,
gumbo - like shale which causes serious drag on
the bit resulting in a reduction in the rate of
penetration
4
bits before use
balled bits
cones being unable to turn because of formation
being packed between the cones
5
balled bits
6
balled bits
million
500
annual
LOSSES
7
historically many ways have been used in
attempting to solve bit balling problems
8
HOW CAN WE SOLVE THE PROBLEM
9
BALLBUSTER BB-2 soap stick
10
soluble surface tension reducers and organic
solids
30 cm long
11
WHAT A 30 CM SOAP STICK CAN DO
12
soften and blast away all accretions of clays on
the bit and drill collar
RESULT
INCREASED R.O.P AND DECREASED WELL COST
13
(No Transcript)
14
With
Without BB-2 BallBuster
WELL 8 / RIG 10 WELL 4/ RIG 10
START DATE jun 11, 2009 mar 27, 2010
END DATE jun 21, 2009 apr 2, 2010
ROCK BIT IN 0 0
ROCK BIT OUT 3919 4212
ROCK BIT RUN 3919 4212
ROCK BIT HOURS 64 38.5
ROCK BIT FT/HRS 61.23 109.40
CHANGE - 78.67
PDC BIT IN 3919 4212
PDC BIT OUT 7900 7680
PDCBIT RUN 3981 3468
PDC BIT HRS 82 49.5
PDC BIT FT/HRS 48.55 70.08
CHANGE - 44.31
TOTAL DRILLING HRS 146 88
15
3
REDUCE
THE DRILLING COST BY AT LEAST
16
BallBuster Soap Sticks Money Saver Calculations
Rock Bit Run - 4212 ft PDC Bit Run - 3468 ft
BB sticks used 4212 /30 141 sticks 3468/30 116 sticks
Hours saved 25.5 1.06 days 32.5 1.35 days
Estimated Well Cost/day USD 100.000 USD 100.000
Cost saving using BB USD 106.000 USD 135.000
Costs of BB treatment 141 sticks x USD 60/sticks USD 8.400 116 sticks x USD 60/sticks USD 6.960
Net costs saving USD 106.000 USD 8.400 USD 97.600 USD 135.000 USD 6.960 USD 128.040
savings for USD 3.000.000 total well costs 3.2 4.3
17
BALL BUSTER
ADVANTAGES
doesnt alter the drilling mud properties
provides the benefit where it is needed
doesnt harm mud pumps
inexpensive
takes only 3 second per connection
100 bio degradable
not hazardous to production zones
compatible with all types of drilling fluids,
including oil muds
not abrasive to metal surfaces, including bits,
nozzles, collars down hole tools
comes packaged in weather resistant thermal bags,
24 sticks per bag
Does not effect downhole motors or turbines
it WORKS!
18
BALLBUSTER
INSTRUCTIONS FOR USE

• place the ballbuster bag, of 24 sticks in a
  convenient and safe space on the drill floor near
  the driller
• unzip the weather resistant thermal bag
• take out 1, 2 or 3 ballbuster BB - 2 sticks
• cut/tear open either end of the plastic cover
• place one stick inside the drill pipe at each
  connection for every 30 feet drilled. Therefore
  if doubles are drilled insert 2 sticks, if
  triples 3 sticks
• complete the connection as usual and continue
  drilling
• Some of the ballbuster BB-2 sticks may be broken
  during the shipment but this will not affect the
  performance of the stick

19
BALLBUSTER
SAFETY AND ENVIROMENTAL DATA

• Product is intended to be inserted inside drill
  pipe upon connection. Precaution should be taken
  as to not injure fingers or hands.
• If product released or spilled.. wipe up, absorb
  on suitable material and dispose of. Slippery
  when wet
• Rinse with water after handling
• For eye contact, flush with water.
• May cause slight skin irritation

20
BALLBUSTER
SAFETY AND ENVIROMENTAL DATA
21
BALLBUSTER
SAFETY AND ENVIROMENTAL DATA
22
BALLBUSTER
SAFETY AND ENVIROMENTAL DATA
23
CONTACT US
PT. BallBuster Indo Asia
WISMA METROPOLITAN II, 6TH FLOOR JL. JEND
SUDIRMAN KAV 29-31 JAKARTA SELATAN 12920 INDONESIA
EMAIL info_at_ballbusterindoasia.com
PHONE [phone]
FAX [phone]
THANK YOU