insulin pump

1
QUICK GUIDE
1. Adhering the Base
2. Removing the Protective Cover
Remove the inserter's protective safetycover by
using the notch at the top for
Remove the adhesive tape backing.Apply the base
to the skin and press
resistance while simultaneously and with
onemotion pulling it straight o .
rmly for a few seconds. Press around allthe
exposed adhesive tape edges.
Note that the cover should be easilyseparated
from the inserter itself.
3. Inserting the Needle/ Cannula
4. Removing the Inserter
Pinch in the small buttons at each end ofthe
inserter base. This releases the
insertiondevice lock enabling you to remove and
Press in rmly and completely the largetrigger
button at the side of the inserter .You will
hear a clicking sound as you do so.
discard the inserter which now contains
theretracted needle.
Check for the presence of the cannula cap at
thecenter of the inserter base before attaching
thetubing connector to the base.
Spring-Set Health Solutions Ltd.
3 Hasadna Street, Tirat Carmel 39032, Israel
Tel [phone] Fax [phone]
info_at_springnow.com www.springnow.com
For complete instructions,please refer to the
instructionsfor use supplied with theproduct.
2 STERILEEO 0483
Non-Pyrogenic Only
2
www.SpringUniversal.com