Practical Points on Changing the Circular Saw Blades

1
Circular Blades

• Information on circular saw blades

2
Practical Points on Changing the Circular Saw
Blades

• TCT circular saws are the multipurpose saw blades
  which are unique creation and invention and all
  the more industrially tough and ergonomic in
  design. The saw blades beat your expectation and
  it would bring a dynamic change and difference
  for all the industrial design operations.
• Circular saw blades are one of the sought after
  power tools used in the industry that have the
  capabilities for practically cutting any material
  in just any way and for just any purpose. The saw
  blades are universally used for various
  industrial cutting operations and these bring in
  easy cutting procedures.
• With the introduction of technically superior and
  functionally outsmart tools, Circular saw blades
  have become the advantageous cutting tools and
  moreover, one can easily replace the new circular
  saw bladed with the new ones by following simple
  and easy steps. It will not take much of man
  hours and all you need to have in your possession
  is adjustable wrench. You will find that the
  cutting machine is ready with the new circular
  saw blades and you will enjoy great cutting
  session.

3

• However, if we take into consideration the real
  time procedures in replacing the old and worn out
  circular saw blades with new ones, there are step
  by step procedures which need to put into
  practice.
• The first thing which needs to be done is
  disengage the tool by turning the tool off and
  then removing the battery or unplugging the
  electric cod from the plug.
• Next, you make the saw rest on the solid iron
  table and let the blade hang out from the tables
  edge. If there are clamps on the table then you
  can use them to fix the saw to the bench for
  handy blade replacements, or else you can also
  use your weight for securing the saw steady in
  its position.
• Cover the blades with the protective blade guard
  and hold the guard with thumb for the purpose of
  securing the saw to the table. Now, gradually
  rotate the saw blade with your hand for finding
  the offset hole where the bit is inserted and
  prevents the movement of blade any further.

4

• You should attach the adjustable wrench into the
  blade bolt in the saw blade. The bolt will fix
  the blade to the saw and the blade will remain
  completely secured. Eliminate the bolt, the bit,
  and the old blade. Gradually slide the new
  circular saw blade over the blade hub and re
  insert the bit directly inside the offset hole.
  Rotate the blade in counter clock wise direction
  and everything is done.