Non-Arc Welding Processes Continued - PowerPoint PPT Presentation

1 / 41
About This Presentation
Title:

Non-Arc Welding Processes Continued

Description:

Non-Arc Welding Processes Continued Non-Arc Welding Processes Resistive heating, chemical reactions, focused light and electrons, sound waves, and friction can also ... – PowerPoint PPT presentation

Number of Views:189
Avg rating:3.0/5.0
Slides: 42
Provided by: gatewaycoa
Category:

less

Transcript and Presenter's Notes

Title: Non-Arc Welding Processes Continued


1
Non-Arc Welding Processes Continued
2
Non-Arc Welding Processes (Cont.)
  • Learning Activities
  • Look up Keywords
  • View Slides
  • Read Notes,
  • Listen to lecture
  • Do on-line workbook
  • Do homework
  • Lesson Objectives
  • When you finish this lesson you will understand
  • High Energy Density Welding, Advantages and
    Disadvantages
  • Soldering and Brazing Systems
  • Plastics Bonding
  • Adhesive Bonding

Keywords Laser Beam Welding (LBW), Electron Beam
Welding (EBW), Plasma Plume, YAG, Soldering,
Brazing, Flux, Wave Soldering, Hot Plate
Welding, Hot Gas Welding, Vibration Welding,
Ultrasonic Welding, Thermoplastic, Thermoset,
Adhesive Bonding, Curing
3
Non-Arc Welding Processes
Introduction
  • Resistive heating, chemical reactions, focused
    light and electrons, sound waves, and friction
    can also be used to join materials
  • Resistance welding
  • Oxy-Fuel Welding
  • Friction welding (Solid State)
  • Laser and electron beam welding
  • Brazing and soldering
  • Plastics joining
  • Adhesive bonding

4
High Energy Density Processes
High Energy Density Processes
  • Focus energy onto a small area
  • Laser
  • CO2 gas fixed position
  • Nd-YAG crystal fiber-optic delivery
  • Electron Beam

5
High Energy Density Processes
  • These processes focus the energy onto a small
    area
  • Laser - 0.0001-inch thick stainless steel sheet
  • Electron Beam - 0.030-inch weld width on 0.5 inch
    thick steel plate

0.1.1.2.1.T2.95.12
6
Laser Beam Welding (LBW)
Laser
0.1.1.2.1.T3.95.12
7
Laser Beam Welding (LBW)
High Energy Density Processes
  • Single pass weld penetration up to 3/4 in steel
  • Materials need not be conductive
  • No filler metal required
  • Low heat input produces low distortion
  • Does not require a vacuum

Plasma keyhole
Keyhole welding
8
Focusing the Beam
High Energy Density Processes
Heat Surface Welding
Cutting treatment modification
9
Advantages
  • Single pass weld penetration up to 3/4 in steel
  • High Travel speed
  • Materials need not be conductive
  • No filler metal required
  • Low heat input produces low distortion
  • Does not require a vacuum

0.1.1.2.1.T4.95.12
10
Limitations
High Energy Density Processes
  • High initial start-up costs
  • Part fit-up and joint tracking are critical
  • Not portable
  • Metals such as copper and aluminum have high
    reflectivity and are difficult to laser weld
  • High cooling rates may lead to materials problems

11
Electron Beam Welding (EBW)
EB Applications
0.1.1.2.1.T6.95.12
12
Electron Beam Welding (EBW)
High Energy Density Processes
Advantages
  • Deepest single pass weld penetration of the
    fusion processes
  • 14-inch-thick steel
  • Fast travel speeds
  • Low heat input welds produce low distortion

13
Limitations
High Energy Density Processes
  • High initial start-up cost
  • Not portable
  • Part size limited by size of vacuum chamber
  • Produces x-rays
  • Part fit-up is critical
  • High cooling rates may lead to materials problems

14
Questions?
  • Turn to the person sitting next to you and
    discuss (1 min.)
  • In laser welding, materials with high
    reflectivity reflect the beam right off the
    surface and no heat is absorbed and thus they are
    difficult to weld. What might we do to make
    these high reflectivity materials more weldable?

15
Non-Arc Welding Processes
Introduction
  • Resistive heating, chemical reactions, focused
    light and electrons, sound waves, and friction
    can also be used to join materials
  • Resistance welding
  • Oxy-Fuel Welding
  • Friction welding (Solid State)
  • Laser and electron beam welding
  • Brazing and soldering
  • Plastics joining
  • Adhesive bonding

16
Brazing (B) and Soldering (S)
Brazing and Soldering
  • In these processes, the base metals are heated
    but do not melt only the filler metal melts
  • Brazing filler metals having a melting point
    above 840 F (450C)
  • Soldering filler metals have a melting point
    below 840F (450C)

17
Brazing and Soldering
0.1.1.2.4.T18.95.12
18
Application of Low Thermal Expansion Alloys
  • Thermal expansion mismatch in metal-ceramic
    joints can lead to cracks in the ceramic
  • Thermal expansion coefficients at 25C (10-6 mm /
    mmC)
  • Alumina, 8.8
  • Nickel, 13.3
  • Iron, 11.8
  • Kovar, 5.0

Kovar lid
Silicon chip
Alumina substrate
Brazed joints
0.1.1.2.4.T20.95.12
19
Brazing Specifications
Brazing and Soldering
  • AWS A5.8 Specification for Brazing Filler Metal
  • 8 well-defined groups (B) plus a vacuum grade
    (BV)
  • BAg-1 (44-46 Ag, 14-16 Cu, 14-18 Zn, 23-25 Cd)
  • BAu-1 (37-38 Au, remainder Cu)
  • BCuP-1 (4.8-5.2 P, remainder Cu)
  • Standard forms strip, sheet, wire, rod, powder
  • Joint design tolerances, generally 0.002 -
    0.006 inches
  • Uses for each braze material
  • AWS C3.3 Standard Method for Evaluating the
    Strength of Brazed Joints

20
Balchin Castner, Health Safety, McGraw
Hill, 1993
21
Advantages
Brazing and Soldering
  • Joins unweldable materials
  • Base metals dont melt
  • Can be used on metals and ceramics
  • Joined parts can be taken apart at a later time
  • Batch furnace can easily process multiple parts
  • Portable when joining small parts

22
Limitations
Brazing and Soldering
  • Joint tolerance is critical
  • Lower strength than a welded joint
  • Large parts require large furnaces
  • Manual processes require skilled workers
  • Flux

23
Questions?
  • Turn to the person sitting next to you and
    discuss (1 min.)
  • Why is joint tolerance so critical?
  • What happens if the joint space is too large?
  • What happens if the joint space is too small?
  • Turn to the person sitting next to you and
    discuss (1 min.)
  • What happens if we do not have sufficient flux?

24
Non-Arc Welding Processes
Introduction
  • Resistive heating, chemical reactions, focused
    light and electrons, sound waves, and friction
    can also be used to join materials
  • Resistance welding
  • Oxy-Fuel Welding
  • Friction welding (Solid State)
  • Laser and electron beam welding
  • Brazing and soldering
  • Plastics joining
  • Adhesive bonding

25
Joining Plastics
Welding of Plastics
(Poly)ethylene
  • Polymer - a single building block (mer) is
    repeated to form a long chain molecule
  • Thermoplastic polymers soften when heated, harden
    when cooled
  • 2-liter bottles
  • Thermosetting polymers dont soften when heated
  • Car tires, caulking compound

add H2O2
26
Joining of Plastics
  • Plastic (polymer) is a material in which single
    building blocks (mers) join to form a long chain
    or network molecule
  • Thermoplastic polymers soften when heated and
    harden when cooled
  • Foam cups (polystyrene), 2-liter bottles
    (polyethylene), Leisure suits (polyester)
  • Thermosetting polymers become permanently hard
    when heat is applied and do not soften upon
    subsequent heating
  • Car tires (isoprene, isobutene), Epoxy, Caulks
    (silicones)

0.1.1.2.5.T22.95.12
27
Hot Plate, Hot Gas, Infrared
  • Advantages
  • Provide strong joints
  • Reliable
  • Used on difficult to join plastics
  • Limitations
  • Slow
  • Limited temperature range

0.1.1.2.5.T23.95.12
28
Hot Plate, Infrared Welding
Welding of Plastics
Hot plate welding
29
Hot Gas Welding
Welding of Plastics
  • Thermoplastics (hotmelts)
  • Adhesive is heated until it softens, then hardens
    on cooling
  • Hot gas softens filler and base material
  • Filler is pulled or fed into the joint

30
Vibration
  • Advantages
  • Speed
  • Used on many materials
  • Limitations
  • Size
  • Requires fixturing
  • Equipment costly

0.1.1.2.5.T24.95.12
31
Ultrasonic
  • Advantages
  • Fast
  • Can spot or seam weld
  • Limitations
  • Equipment complex, many variables
  • Only use on small parts
  • Cannot weld all plastics

0.1.1.2.5.T25.95.12
32
Questions?
  • Turn to the person sitting next to you and
    discuss (1 min.)
  • Make a list of some thermoplastic items you have
    recently seen that have been wlded.

33
Non-Arc Welding Processes
Introduction
  • Resistive heating, chemical reactions, focused
    light and electrons, sound waves, and friction
    can also be used to join materials
  • Resistance welding
  • Oxy-Fuel Welding
  • Friction welding (Solid State)
  • Laser and electron beam welding
  • Brazing and soldering
  • Plastics joining
  • Adhesive bonding

34
Adhesives
  • Thermosets form long polymer chains by chemical
    reaction (curing)
  • Heat is the most common means of curing
  • Ultraviolet light, oxygen - acrylics
  • Moisture - cyanoacrylates
  • Thermoplastics (hotmelts)
  • Adhesive is heated until it softens, then hardens
    on cooling -Polyethylene, PVC

0.1.1.2.6.T26.95.12
35
Curing of Adhesives
Adhesive Bonding
  • Thermosets form long polymer chains by chemical
    reaction (curing)
  • Heat (epoxy)
  • Ultraviolet light, oxygen (acrylics)
  • Moisture (superglue)

36
Stress Modes - Best to Worst
2. Shear
1. Compression
3. Tension
5. Cleavage
4. Peel
0.1.1.2.6.T29.95.12
37
Why Adhesive Bonding?
Adhesive Bonding
  • Dissimilar materials
  • Plastic to metal
  • Materials that can be damaged by mechanical
    attachments
  • Shock absorption or mechanical dampening
  • Laminate structures
  • Skin to honeycomb structure

38
Adhesive Selection
Adhesive Bonding
  • Adhesive selection is based primarily on
  • Type of substrate
  • Strength requirements, type of loading, impact
    requirements
  • Temperature resistance, if required
  • Epoxy
  • Cyanoacrylates
  • Anaerobics - metals
  • Urethanes
  • Silicones
  • Pressure sensitive adhesives (PSAs)

39
Factors that Influence Process Selection
Process Selection
  • Material joining needs
  • Capabilities of available processes
  • Cost
  • Environment
  • Required welding speed
  • Skill level
  • Part Fit-up

40
Advantages
  • Joining dissimilar materials - plastic to metal
  • Materials that can be damaged by mechanical
    attachments
  • Blind joints
  • Shock absorption or mechanical dampening
  • Temporary alignment
  • Laminated structures
  • Thin substrates - skin-to-honeycomb construction
  • Stress distribution

0.1.1.2.6.T27.95.12
41
Limitations
Adhesive Bonding
  • Adhesives dont do work, they distribute work
    they are not structural materials
  • Environmental degradation
  • Temperature
  • Oxidation
  • Difficult to repair
  • Curing or setting time
  • Surface preparation

42
Homework
Do Homework Assignment 3 on More Welding
Processes and Turn in by next class period.
Write a Comment
User Comments (0)
About PowerShow.com